Kegco Kegco Commercial Grade Digital Javarator Cold Brew Coffee Kegerator - Black Cabinet with Black Door

• ZCK-163B Cabinet and Single Faucet Cold Brew Coffee Dispense System
• Black Cabinet with a Decorative Black Door
• This Iced Coffee Keg Dispenser comes with a complete Direct Draw Kit for Cold-Brew Coffee Kegs.
• Includes a brand new aluminum 15 cu. ft. Aluminum Nitrogen Tank with Sleek Black Epoxy Finish
  This tank is produced from high strength, corrosion-resistant aluminum alloy 6061-T6. The eye-catching sleek black epoxy finish acts as an extra layer of protection against corrosion and wear, and the aluminum construction is lighter weight than steel tanks and does not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. (5.5" diameter, 18.25" Height).
• Includes a Commercial Grade Dual Gauge Nitrogen Regulator
  This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components, an integral safety pressure relief valve that releases at 45 PSI, and a shut-off valve that allows you to instantly shut off pressure to the keg. A large pressure adjustment knob makes it easy to adjust the pressure by hand without requiring a screwdriver.
• Includes 5 feet of 5/16 Inch I.D. Air Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Nitrogen Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes Ball Lock Keg Couplers
  This set includes both a gas in and coffee out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
• Includes a 3" Diameter Stainless Steel Draft Tower
  The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Stainless Steel Draft Tower with 100% Stainless Steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 Feet of 3/16 Inch I.D. Clear Tubing. This Tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking.
• Maximum Ambient Temperature: 90 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
• A great choice for dispensing beer, soda, kombucha, and wine
• Easy roll casters provide convenient mobility
• Removable built-in drip tray with grill collects drips and spills
• Chrome guard rail helps prevent mugs and glasses from sliding off
• Steel interior floor mat ensures long-lasting durability and allows kegs to glide easily in and out of the cabinet
• 25% more energy efficient design saves you money each month!
• Plugs into standard home outlets
• CSA listed to conform to NSF/ANSI 7

This kegerator can fit one full size, pony, or quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. PLEASE NOTE: Will not accommodate an "A" system keg.