Kegco 24" Wide Cold Brew Coffee Single Tap Stainless Steel Kegerator

Model: ICK20S-1NK
86 Reviews
$1,529.00SAVE 45% - $688.05
$840.95

+ FREE SHIPPING

90 Day Money Back Guarantee

Color

Stainless Steel
Stainless Steel
$840.95

Taps

IN STOCK (usually ships within 24 hours)
DESCRIPTION
FEATURES
WARRANTY
INFO & GUIDES
REVIEWS
Q&A
  • Designed for the unique requirements of dispensing iced coffee on tap from a coffee keg
  • Comes complete with a two tap draft dispense system specially designed for cold-brew coffee
  • Features stylish stainless steel door finish, easy roll locking casters, and large interior capacity
  • Can be easily converted into an all refrigerator using the two included wire shelves
  • Quiet and energy efficient performance makes it ideal for use in the home

    Dimensions: 33.25" H x 24" W x 25" D

The all-new ICK20S-1NK Javarator Cold-Brew Coffee Dispenser from Kegco is a high quality keg tapper that allows you to dispense kegs of cold brewed coffee, giving you a fun new way to get your daily fix of your favorite beverage. This Javarator keg dispenser can also be converted into a standard refrigerator with two adjustable storage shelves. Its stainless steel interior floor plate provides durability by displacing the weight of your kegs evenly over the floor of the cabinet, and allows you to slide the kegs in and out smoothly.

The Kegco ICK20S-1NK is designed for home use so it is quiet and energy efficient, and the black cabinet with stainless steel door will look great in any decor. The removable recessed drip tray with a plastic grill can easily be taken out and cleaned in the dishwasher. The attractive chrome safety rail helps to keep mugs and glasses from sliding off and installs with ease. Easy roll casters make moving this unit from your bar to your patio a breeze, and they lock to prevent the unit from rolling once you have it in position. This Iced Coffee Kegerator comes complete with a single tap draft dispense system.

  • Black Cabinet with a Stainless Steel Door
  • This Iced Coffee Keg Dispenser comes complete with a single tap draft dispense system
  • Maximum Ambient Temperature: 100 degrees Fahrenheit
  • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
  • Measures at 33.25"H x 24"W x 25"D
  • 2 full-width wire shelves and a hole plug to convert into a Compact Refrigerator
  • Built-in Drip Tray with Grill to Collect spills
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • Stainless Steel interior floor mat for long lasting durability and easy glide of kegs
  • Textured serving counter top
  • 25% more energy efficient design saves you money each month!
  • CSA Listed

Warranty Information:

  • 1 Year Parts and Labor
  • 5 Years on Compressor (parts only)
UPC: 810033765957

Labor - 12 Months

LIMITED ONE YEAR WARRANTY

For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

Parts - 60 Months

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:

For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.

Additional Details

WHAT IS NOT COVERED:
  • Content losses of food or other, due to spoilage.
  • Incidental or consequential damages.
  • Parts and labor costs for the following will not be considered as warranty:
    • Door springs, and/or frames.
    • Inner door panels, door rails and/or door supports.
    • Light bulbs and/or plastic housing.
    • Plastic cabinet liners.
    • Punctured evaporator that voids the warranty on the complete sealed system.
    • Repairs performed by unauthorized servicers.
    • Shipping and handling costs associated with the replacement of the unit.
    • Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
    • Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
    • Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
    • Replacement of house fuses or resetting circuit breakers.
  • Failure of the product if it is used for other than its intended purpose.
  • This warranty does not apply outside the Continental USA.

06/11/2013

My new favorite kegerator
Beeroholic

This is my fourth kegerator, so I feel like I have a pretty good idea of what I'm talking about at this point. I've had a Danby and a Haier and my dad has had a Beverage Air so those are the brands I'm comparing it to. I got the Haier first and it lasted for a couple years but the beer always seemed to be a bit foamy. I was an impatient idiot and instead of waiting for it to defrost, I tried chipping the ice off of the plate in the back and punctured it, causing all the liquid to leak out. I bought the Danby next because it had a digital temp display which I thought would be cool. Well, the digital temp display just told me that it didn't get very cold. I had more foam and talking to the folks at Beverage Factory, found out that if beer is not cold enough, that causes foam. I couldn't get it to go any colder, so I sold it and bought the Kegco. I've had it for a couple months and couldn't be happier. It really gets cold! I measured the temp down below 30 at it's coldest setting so I actually had to turn it up a bit. I really like the look of it and the built in drip tray is easy to clean and allows plenty of room between the top of the kegerator and the faucet. I would say it gets every bit as cold as my dad's commercial grade Beverage Air but it doesn't sound like a jet engine! (his kegerator is LOUD!) I see that Kegco has a digital kegerator out now so maybe I ordered a little too soon, but maybe I'll sell this one and buy it later! Overall, I'm very happy with the performance.

06/10/2013

Cold and good shipping
M Busch

After reading a lot of reviews about kegerators I decided to call Beverage Factory. This model was recommended to me for the best value. I was told that the K209SS has a thermostat designed to make the kegerator run at colder temperatures. That is correct I don't know the temperature inside, but, the beer is very cold and I don't have foam issues like some other reviews I have read. It was easy to assemble probably took about 30 minutes and the flush drip tray is a cool little extra. For the money it was great value.

I ordered on a Saturday it took 5 business days to me with the appt. I set-up.

06/10/2013

Good Unit
Stylin

The Kegco 209 has kept my beer ice cold with nice smooth pours. Looking like great beer and times in my future.

06/09/2013

Saving Money Beer Tastes Better
J Esposito

For the price, this kegerator is the best option. I already have recommended to my friends. I have already drunk quite a few kegs before this review. All the kegs have been super cold and the beer super tasty. I am saving big time by buying kegs over beer bottles. Less mess and less recycling makes it even nicer. I have to adjust the CO2 pressure over time as sometimes. Overall this unit has been a breeze to operate and maintain.

05/07/2013

Coors cooler
Good Friend

My friend works at Coors and is able to get me a free keg from time to time so I needed a kegerator that would fit their keg with no problems and this one was recommended. When it arrived, I got it set up quickly and as advertised, had no problems fitting the Coors keg inside. One thing to watch out for - when i first hooked it up, I figured I'd turn it to it's highest setting because I love cold beer and I've seen other kegerators that struggle to maintain the right temp. Well, I ended up freezing my first keg because this thing got colder than I expected. The thermometer was reading 23 degrees at the 6 setting, so I moved it to between 4 and 5 and it's right around 32. It's perfect!

Showing Reviews 71-75 of 86
First   13 14 15 16 17   Last
Question:
Are the three handle pulls screw on so I could switch them out for a branded handle if wanted?
by Beer Guy on November 13, 2018
Answer:
Hello Beer Guy,

Yes you can attach a branded handle so no worries on that end. Hope this help and thank you for your question.

Thank you,
by Hector on November 14, 2018
Staff Answer
Question:
Can the kegco Model:K209B-1 be safely put under a counter?? It looks like it is the same size as the "built-in" models on this site, if not just touch smaller. Didn't look like there was any real difference in specs/size btw the built in models and this model?
by B on December 29, 2018
Answer:
This model is meant to be used in a freestanding application. It will require a minimum of 3" of air space on the rear and each side to allow for proper air circulation around the compressor.
by Nick on January 02, 2019
Staff Answer
Question:
Can I fit 5 corny’s Plus a 5lb CO2 tank inside?
by BJ on February 27, 2019
Answer:
No, the most you can fit is 3 cornys and a tank
by Dave on March 13, 2019
Staff Answer
Question:
Can one of the faucets be swapped out for a stout?
by Nitrobro on March 02, 2019
Answer:
Yes, the connection points are all universal so you can have them switched if you call in and do an order with anyone in our sales department.
by Dave on March 06, 2019
Staff Answer
Question:
Will this unit hold Miller/Coors kegs?
by TLS on June 02, 2019
Answer:
yes this unit will fit a coors miller keg.
by Dave on June 04, 2019
Staff Answer
Showing Questions 1-5 of 20
 1 2 3   Last

Select Options & Upgrades

Select Faucet Option
SELECT KEG COUPLERS
SELECT NITROGEN REGULATOR
SELECT GAS TANK
Optional Cleaning Kit (Important To Clean Lines after each Keg)
Add Cold Brew Cleaner
OPTIONAL STAINLESS STEEL DRIP TRAY
ADD RESIDENTIAL KEGERATOR COVER
CUSTOMIZE
Optional Extended Warranty
Kegco 24" Wide Cold Brew Coffee Single Tap Stainless Steel Kegerator $1,529.00 SAVE 45% - $688.05 $840.95
Kegco ICK20S-1 Cold Brew Coffee Dispensers
OPTIONS SUMMARY
SELECT FAUCET OPTION
Stainless Steel Standard Faucet
SELECT KEG COUPLERS
Standard Ball Lock Coupler Set (Included)
SELECT NITROGEN REGULATOR
Elite Series Dual Gauge Nitrogen Regulator (included)
SELECT GAS TANK
15 Cu. Ft. Nitrogen Air Tank with Sleek Black Epoxy Finish (included)
OPTIONAL CLEANING KIT (IMPORTANT TO CLEAN LINES AFTER EACH KEG)
No Cleaning Kit Added
ADD COLD BREW CLEANER
OPTIONAL STAINLESS STEEL DRIP TRAY
ADD RESIDENTIAL KEGERATOR COVER
None Selected
CUSTOMIZE
None Selected
OPTIONAL EXTENDED WARRANTY
I don't want an extended warranty
Base Price
$840.95
Options
Total

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....