Kegco 24" Wide Cold Brew Coffee Dual Tap Stainless Steel Kegerator

Model: ICK20S-2NK
84 Reviews
$1,606.00SAVE 45% - $722.70
$883.30

+ FREE SHIPPING

90 Day Money Back Guarantee

Color

Stainless Steel
Stainless Steel
$883.30

Taps

IN STOCK (usually ships within 24 hours)
DESCRIPTION
FEATURES
SPECS
WARRANTY
INFO & GUIDES
REVIEWS
Q&A
  • Designed for the unique requirements of dispensing iced coffee on tap from a coffee keg
  • Comes complete with a two tap draft dispense system specially designed for pouring cold brew coffee
  • Features stylish black cabinet with stainless steel door and manual thermostat
  • Large interior capacity accommodates up to three 5 gallon coffee kegs
  • Features rolling casters, a chrome guard rail, and a dishwasher-safe drip tray for easy clean-up

    Dimensions: 33.25" H x 24" W x 25" D

The all-new ICK20S-2NK Javarator Cold-Brew Coffee Dispenser from Kegco is a high quality keg tapper that allows you to dispense two kegs of iced coffee, making it fun and easy to have a variety of delicious iced coffees on tap for friends and family. This Javarator can also be converted into a standard refrigerator with two adjustable storage shelves, and its stainless steel interior floor plate provides durability by displacing the weight of your kegs evenly over the floor of the cabinet.

The Kegco ICK20S-2NK is designed for home use, so it is quiet and energy efficient. It has a sleek black cabinet and a stylish stainless steel door that will look great with any decor. The removable recessed drip tray with plastic grill can easily be taken out and cleaned in the dishwasher, and the attractive and easy-to-install chrome safety rail helps to keep mugs and glasses from sliding off. Easy roll casters make moving this unit from your bar to your patio a breeze, and they lock to prevent the unit from rolling once you have it in position. This Iced Coffee Kegerator comes complete with a two tap draft dispense system.

  • Black Cabinet with Stainless Steel Door
  • Maximum Ambient Temperature: 100 degrees Fahrenheit
  • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
  • Measures at 33.25"H x 24"W x 25"D
  • 2 full-width wire shelves and a hole plug to convert into a Compact Refrigerator
  • Built-in Drip Tray with Grill to Collect spills
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • Stainless Steel interior floor mat for long lasting durability and easy glide of kegs
  • Textured serving counter top
  • 25% more energy efficient design saves you money each month!
  • CSA Listed

Warranty Information:

  • 1 Year Parts and Labor
  • 5 Years on Compressor (parts only)
UPC: 810033765964

Labor - 12 Months

LIMITED ONE YEAR WARRANTY

For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

Parts - 60 Months

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:

For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.

Additional Details

WHAT IS NOT COVERED:
  • Content losses of food or other, due to spoilage.
  • Incidental or consequential damages.
  • Parts and labor costs for the following will not be considered as warranty:
    • Door springs, and/or frames.
    • Inner door panels, door rails and/or door supports.
    • Light bulbs and/or plastic housing.
    • Plastic cabinet liners.
    • Punctured evaporator that voids the warranty on the complete sealed system.
    • Repairs performed by unauthorized servicers.
    • Shipping and handling costs associated with the replacement of the unit.
    • Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
    • Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
    • Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
    • Replacement of house fuses or resetting circuit breakers.
  • Failure of the product if it is used for other than its intended purpose.
  • This warranty does not apply outside the Continental USA.

08/22/2015

Best Choice For Kegerator
Jason

Beverage Factory was quick to answer questions I had about included parts. They make sure all pieces necessary are provided. Nice looking and more space then other brands I looked at. I upgraded to Perlick 630ss faucets and 762-2 regulator both of which operate very smooth. I have thermostat set on "4" which is getting a glass of water to 34 degrees. Still waiting on kegs to stabilize before actually pouring a beer. So far very impressed with quality of components and Beverage Factory for making assembly easy with necessary parts. Definitely happy with purchase.

08/06/2015

I would tell my friends to buy this one
Don

This thing came by truck in about a week which was faster than I expected. Only took me about 15 min. to put it together. Let it cool for 24 hours then put a keg in it. Have been maintaining 31 degrees which seems right for me. This is my second one from beverage factory, great people to deal with. When this one wears out will buy from them again.

06/24/2015

Love it!
Dean

waited two weeks from date of order, once it was delivered, took 15 minutes to setup, let it sit for 24hours before I put a 1/6 barrel in it, not even on the coldest setting and the beer is ice cold, upgraded the tower and could not be happier, should have done this along time ago, upgraded to better gauges as well, should have got dual gauges though, all in all worth every penny.

05/29/2015

Perfect Inside and Out
Asiha

I did a lot of research and read a lot of reviews before making my purchase. In the end, I found that the Kegco K209SS-2 2-Faucet Kegerator was going to be my best bet for getting the best Kegerator for my money. Overall, setup was very easy, came with everything we needed, and it's a damn good looking fridge. Love the dual taps and the option to put 2 smaller kegs in the refrigerator to mix up the beer selection. Once we got a keg in it, it seemed to take about 24 hours to get back to temperature, once it did, it poured great and the beer temp was spot on.

Staff
Staff Reply

Hi Asiha, thank you for your feedback on your new kegerator. I'm glad to hear you are enjoying the look of the fridge and the setup was easy. We do recommend putting your new full kegs in the kegerator for several hours in order to fully cool down to temperature and let them settle, just like you did. We're here if you have any questions or needs in the future. Thank you, again!

05/28/2015

Simple, Simple, Simple!
Angel

I put this together myself in 15 minutes! It's that simple. I would like to think I'm a handy female after putting this thing together even changing door direction, took 15 minutes. It really is simple. I hooked up the the CO 2 and turned dial on double regulator that I added and it was perfect just by me turning it all the way up. It's around 10 now and I was told between 10 and 12 I'm great so I never did a thing after turning dial. Beer is so cold. I put kegerator together, plugged it in, bought the beer, put kegs in kegerator and waited a day to tap them so kegs settled. Worked perfect. I researched for days before this purchase and almost bought a cheap one from Wal Mart for 400.00. Reviews had problems with CO2 regulating. This kegerator I'm telling anyone to pay extra for no hassles, ice cold beer, stainless steel, and a double tap. I have Miller Lite and Land Shark now and both pour perfect! Don't hesitate with this purchase! Only problem I had was bottom of door was dented and after contacting company immediately and sending pics they discounted kegerator. It was a nice size foot dent but I covered it with a magnet and opted for discount although they would have sent a brand new one out!

Staff
Staff Reply

We're so happy to hear you are enjoying your new kegerator and you were able to put it together so easily! Thank you for the great feedback and of course let us know if there is anything else we can help you with.

Showing Reviews 21-25 of 84
First   3 4 5 6 7   Last
Question:
Can the kegco Model:K209B-1 be safely put under a counter?? It looks like it is the same size as the "built-in" models on this site, if not just touch smaller. Didn't look like there was any real difference in specs/size btw the built in models and this model?
by B on December 29, 2018
Answer:
This model is meant to be used in a freestanding application. It will require a minimum of 3" of air space on the rear and each side to allow for proper air circulation around the compressor.
by Nick on January 02, 2019
Staff Answer
Question:
Can one of the faucets be swapped out for a stout?
by Nitrobro on March 02, 2019
Answer:
Yes, the connection points are all universal so you can have them switched if you call in and do an order with anyone in our sales department.
by Dave on March 06, 2019
Staff Answer
Question:
Will this unit hold Miller/Coors kegs?
by TLS on June 02, 2019
Answer:
yes this unit will fit a coors miller keg.
by Dave on June 04, 2019
Staff Answer
Question:
Will this hold a tall 1/4 barrel and a 1/6 barrel? If not do you have a model that will?
by Bruce on June 07, 2019
Answer:
The k209 unit will hold both a 1/4 and a 1/6th at the same time.
by Dave on June 11, 2019
Staff Answer
Question:
Is the K209B-3NK NSF certified?
by H on August 08, 2019
Answer:
No, the K209 is not commercially rated and has not gone through NSF certifications.
by Dave on August 10, 2019
Staff Answer
Showing Questions 1-5 of 18
 1 2 3   Last

Select Options & Upgrades

Select Faucet Option
Select 2nd Faucet Option
SELECT KEG COUPLERS
SELECT NITROGEN REGULATOR
SELECT GAS TANK
Optional Cleaning Kit (Important To Clean Lines after each Keg)
Add Cold Brew Cleaner
OPTIONAL STAINLESS STEEL DRIP TRAY
ADD RESIDENTIAL KEGERATOR COVER
CUSTOMIZE
Optional Extended Warranty
Kegco 24" Wide Cold Brew Coffee Dual Tap Stainless Steel Kegerator $1,606.00 SAVE 45% - $722.70 $883.30
Kegco K209SS-2 Kegerator
OPTIONS SUMMARY
SELECT FAUCET OPTION
Stainless Steel Standard Faucet
SELECT 2ND FAUCET OPTION
Stainless Steel Standard Faucet
SELECT KEG COUPLERS
Two Standard Ball Lock Coupler Sets (Included)
SELECT NITROGEN REGULATOR
Elite Series Dual Gauge Two Product Nitrogen Regulator (included)
SELECT GAS TANK
15 Cu. Ft. Nitrogen Air Tank with Sleek Black Epoxy Finish (included)
OPTIONAL CLEANING KIT (IMPORTANT TO CLEAN LINES AFTER EACH KEG)
No Cleaning Kit Added
ADD COLD BREW CLEANER
OPTIONAL STAINLESS STEEL DRIP TRAY
ADD RESIDENTIAL KEGERATOR COVER
None Selected
CUSTOMIZE
None Selected
OPTIONAL EXTENDED WARRANTY
I don't want an extended warranty
Base Price
$883.30
Options
Total

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....