Kegco 24" Wide Cold Brew Coffee Dual Tap Black Commercial Kegerator

• Designed for the unique requirements of dispensing iced coffee on tap from up to two coffee kegs at the same time
• Two tap dispense system consists of stainless steel and food grade plastic to ensure cleanliness
• Rugged steel construction with stainless steel top and built-in drip tray that collects spills
• Can hold two quarter slim kegs or up to four 5 gallon kegs with external nitrogen tank
• ETL and ETL Sanitation Listed and NSF Compliant for commercial use

Kegco's ICXCK-1B-2 Dual Faucet Commercial Javarator is ideally suited for a coffee shop or small restaurant that is looking to start dispensing iced coffee from multiple kegs! The interior is large enough to hold one full size keg or multiple smaller kegs, allowing you to offer your customers a variety of cold brewed coffee choices. You can dispense two types of kegged coffee from 7.75 gallon quarter slim kegs, or keep up to four 5 gallon kegs in the keg cooler so you can serve from two while keeping two more ice cold and at the ready. The kegerator features a knockout that allows you to place your nitrogen tank outside the unit, leaving you more room inside for kegs!

1. Blower Hose for Air-Cooled Tower

   Keep the beverage line cooled all the way up to the back of the faucet

2. Fan-Forced Cooling

   An interior fan provides rapid cool down and ensures consistent temperatures

3. Internal Thermometer

   Quickly and accurately monitor the internal temperature at a glance

4. Knockout for external Nitrogen Tank or Drain Hose

   This knockout allows you to mount your nitrogen tank outside the cabinet or direct the drip tray runoff to an external drain

5. Drip Tray Drain Receptacle

   Any spills from the faucet can be directed into this bottle for quick and easy cleaning

6. Steel Walls

   Behind these walls lies foamed in place polyurethane insulation to maintain a specific steady temperature

7. Rubber Floor Mat

   A rubber floor mat reduces the shock of heavy kegs on the stainless steel floor

4" locking casters make this cold-brew coffee dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your iced coffee stays cold all the way up to the faucet.

This iced coffee kegerator includes a Kegco Exclusive 14" tall dual faucet tower with stainless steel faucets and fittings, two sets of ball lock keg couplers for Cornelius home brew kegs, a dual gauge nitrogen regulator, an aluminum nitrogen tank, and an empty 15 cu. ft. aluminum nitrogen tank with sleek black epoxy finish. Although everything necessary to tap two ball lock Cornelius kegs is included, the ICXCK-1B-2 is customizable with many different features. The standard faucets are constructed of durable and sanitary stainless steel, but we provide the option of upgrading to Perlick faucets, which have less internal surface area to prevent sticky faucet knobs. The included ball lock keg couplers are food grade plastic and are designed to prevent corrosion, but we also have the option to upgrade to stainless steel ball lock couplers. View the options below and feel free to give us a call at 1-800-710-9939 option 1 with any questions regarding the dispense system.

• Includes a brand new aluminum 15 cu. ft. Nitrogen Tank with Sleek Black Epoxy Finish
  This tank is produced from high strength, corrosion-resistant aluminum alloy 6061-T6. The eye-catching sleek black epoxy finish acts as an extra layer of protection against corrosion and wear, and the aluminum construction is lighter weight than steel tanks and does not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. (5.5" diameter, 18.25" Height).
• Includes a Commercial Grade Dual Gauge Nitrogen Regulator
  This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components, an integral safety pressure relief valve that releases at 45 PSI, and shut-off valves that allow you to instantly shut off pressure to the kegs. A large pressure adjustment knob makes it easy to adjust the pressure by hand without requiring a screwdriver.
• Includes two 5 foot lengths of 5/16" I.D. Air Line Assembly with 2 Snap Clamps each
  Two standard 5 foot lengths of 5/16" I.D. Blue Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
• Includes two sets of Ball Lock Home Brew Keg Couplers
  Each set includes both a gas in and a beer out coupler that work with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
• Includes a Kegco Exclusive 14" Tall, 3" Diameter Double Faucet Stainless Steel Draft Tower
  The tower is a commercial grade single column, double faucet, 3" diameter stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucets can be upgraded to Perlick faucets, which have less internal surface area to prevent the faucet knobs from sticking. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
• Keg Storage Capacities:
• One (1) Full Size / 1/2-Barrel (15.5 Gal.)
• One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
• Two (2) 1/4-Barrel Slim (7.75 Gal.) or
• Four (4) 1/6-Barrel (5.23 Gal.)
• Maximum Ambient Temperature: 90 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
• Continuous cold air channeled through tower to ensure cold product
• Heavy-duty stainless steel top
• Built-in drip tray with drain
• Stainless steel interior walls and ceiling
• Rubber Floor Mat prevents damage to interior
• Magnetic gasket provides positive door sealing
• Self-closing door with lock
• Refrigeration system utilizes ozone friendly R134a refrigerant
• CFC-free foamed-in-place polyurethane insulation
• Knockout for remote nitrogen tank
• Black finish
• ETL and ETL Sanitation Listed for Commercial Use

Keg Configurations:

Some configurations require external nitrogen tank mount.

Labor - 12 Months

For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

Parts - 60 Months

For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.

Additional Details

• Content losses of food or other, due to spoilage.
• Incidental or consequential damages.
• Parts and labor costs for the following will not be considered as warranty:
  • Door springs, and/or frames.
  • Inner door panels, door rails and/or door supports.
  • Light bulbs and/or plastic housing.
  • Plastic cabinet liners.
  • Punctured evaporator that voids the warranty on the complete sealed system.
  • Repairs performed by unauthorized servicers.
  • Shipping and handling costs associated with the replacement of the unit.
  • Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
  • Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
  • Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
  • Replacement of house fuses or resetting circuit breakers.
• Failure of the product if it is used for other than its intended purpose.
• This warranty does not apply outside the Continental USA.