MicroMatic Complete 5 Liter Pressurized Keg Beer Kegerator Cleaning Bottle & Tube Kit

Model: 5LCBT
25 Reviews
$299.80SAVE 25% - $74.95
$224.85

90 Day Money Back Guarantee
IN STOCK (usually ships within 24 hours)
  • Pressurized cleaning bottle with tube makes it easy to clean your direct draw system
  • Cleaning bottle cap easily attaches to your keg coupler
  • Includes 4 half oz. packets of beer line cleaner to keep your dispense system clean
  • Comes with a faucet wrench and nylon cleaning brush to easily remove and clean your beer faucet
  • Keep your beer lines clean your your beer tasting brewery fresh!
DESCRIPTION
INFO & GUIDES
REVIEWS
Q&A

BeverageFactory.com is proud to offer a complete solution to cleaning your beer lines. These kits are both economical and easy to use. Just tap one of these bottles filled with cleaning solution like it was a normal keg to clean out your lines. Clean lines mean fresh tasting beer.

The kit includes a pressurized cleaning bottle and tube, a bottle cap, 4 half-ounce packets of beer line cleaner, a nylon cleaning brush and a standard duty faucet wrench (not shown).

  1. Fill the cleaning bottle with line cleaner solution. Secure the bottle cap onto the mouth. Detach the keg coupler from your keg and attach it to the cleaning bottle cap.

  2. Place a bucket or drain underneath your faucet to catch the cleaning fluid. Your draft beer system is now ready to be cleaned.

  3. Pull forward on your faucet handle to begin. Your CO2 cannister forces the cleaning solution through the keg coupler, through the beer lines, out of your faucet and into the waiting waste receptacle.

  4. Repeat the above with clean water to rinse the lines, and you now have a clean, fresh-tasting draft beer system again.

We recommend that you clean your draft beer system with Beer Line Cleaner at least every month or every other keg. Every four or five normal cleanings, we suggest you use an Acid Line Cleaner to remove mineral deposits and prolong the life and quality of your draft beer system.

08/09/2016

Good product
Andrew

Very easy to clean keg lines with this. No disassembly required of lines and faucets. Instructions shipped were for different product but it wasn't too hard to figure out. Cleaner is only 4 Oz. So you get basically a few cleaning then have to replace.

03/24/2016

Exactly what I needed
Randy

I was struggling to find the right system to clean my new keg lines but found the answer. This cleaning kit saved me from having to pull off hose lines from keg coupler and made cleaning very easy.

01/12/2016

Worked well to clean my valve and lines
Sparky

I was able to hooked it up easily and clean my bar lines.

10/23/2015

Fast and easy, A+
Eric

Pricey but worth it - love the simplicity and speed.

06/25/2015

easy to use!
JIMMY


Took it out of the box, followed the instructions, and was enjoying beer in minutes. Had to flip the bottle to get it to start into the line (low on C02)but it worked like a charm after that.

Showing Reviews 6-10 of 25
  1 2 3 4   Last
Question:
I can’t get the solution to go thru the beer lines. I have it connected to co2
by Rhett on August 17, 2019
Answer:
Please contact our technical department to assist you.
1-800-710-9939 option 4
by Ben on August 23, 2019
Staff Answer
Question:
Do you have a parts list for these pressurised cleaning vessels? I think I might have lost a washer on the top.
by Luvbeer on August 31, 2019
Answer:
Unfortunately we do not have individual parts for these, it would be best to contact Micromatic for parts replacement on their cleaning cans.
by Dave on September 06, 2019
Staff Answer
Question:
After cleaning solution has been used, do I just rinse container and fill with fresh water to flush system ? Perhaps include more instruction for novices like myself. Thank you.
by Dick on October 22, 2019
Answer:
We do recommend flushing the system with water after cleaning the lines with the solution.
by Jake on October 29, 2019
Staff Answer
Question:
What is the maximum PSI for this cleaner bottle?
by High PSI User, Nitro on November 04, 2019
Answer:
60 PSI pressure relief, for cleaning bottle caps during beer line cleaning
Feel free to reachout to me directly to place an order.
Ben Reaney 858-218-2339
by Ben on November 05, 2019
Staff Answer
Question:
Does this work with the perlick lowboy coupler
by Beeeeeeeeeeeeeer on September 27, 2024
Answer:
Yes
by Steve on September 30, 2024
Staff Answer

Select Options & Upgrades

Specify KEG COUPLER SYSTEM
MicroMatic Complete 5 Liter Pressurized Keg Beer Kegerator Cleaning Bottle & Tube Kit $299.80 SAVE 25% - $74.95 $224.85
Complete 5 Liter Pressurized Keg Beer Kegerator Cleaning Bottle & Tube Kit
OPTIONS SUMMARY
SPECIFY KEG COUPLER SYSTEM
American "D" Tap System
Base Price
$224.85
Options
Total

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....