MicroMatic 12" Flush Mount Drip Tray with Glass Rinser

This stainless steel flush mount drip tray has a built-in glass rinser. Add some dispense excitement to each glass by simply inverting the beer glass and pushing down on the built-in sprayer. Cold water is rinsed over the inside of the glass! A wetted glass makes pouring the perfect glass of draught easier.

Features:

• Premium flush mounted drip tray with glass rinser
• Robust 18 gauge stainless steel construction
• Fast draining, precision perforated screen
• Center mounted drain, 1-3/4" x 1/2" N.P.T. drain pipe perfect for plumbing with PVC directly to a drain

Rinser Water Inlet Installation

• Always check local plumbing codes first
• Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure)
• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking)
• Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly)
• If teed into soda system make sure system can handle the increased water demand. Have plumber install a 45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system
• Install a shut-off for the water supply if line is not hard plumbed into the system

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.