UBC Tayfun Flash Chiller - 6 Product Lines
Model: T160F-1/2T6- The UBC T160F-1/2T6 Tayfun Flash Chiller is most suitable for cooling beer, beverages, juice and pre-chilling water where there is limited refrigeration
- Product is chilled by running through 53' stainless steel coil submerged on ice cold water
- This unit includes 4 stainless steel coils that measure 350 feet in length
- Flash chiller comes equipped with a manual thermostat, an ice sensor, and a submerged agitator pump
- Icebank prechiller for 1 or 6 beers, beverages or water lines
The T160F-1/2T6 Tayfun Flash Chiller with 6 product lines is an ideal beer flash chiller. This flash cooler comes equipped with four 53' stainless steel coils and a submerged agitator pump. This tayfun chiller foam in place of an insulated bath and an ice bank chiller for 1 to 6 beer, beverage, or water lines.
Flash chillers are a specific kind of refrigeration system used to cool alcohol and other beverages. A Flash Chiller or Cooler is ideal for dispensing ice cold seltzer, juice, tea and beers when there is limited refrigeration and it is impracticable to use cold plates and coils requiring a continuous supply of ice and drainage. Using a flash chiller allows home brewers raise the temperature of the product dramatically over a short period of time, depending on the production needs. A flash chiller includes an ice bank and a stainless steel coil that is submerged in ice cold water. Flash chilled draft beer dispensing systems are typically used in commercial applications such as bars, restaurants, and stadiums.
- Icebank prechiller for 1 or 6 beer, beverage or water lines
- Most suitable for cooling beer , beverages, juice and pre-chilling water where there is limited refrigeration
- Product is chilled by running through 53' stainless steel coil submerged on ice cold water
- 4 stainless steel coil , 1/4"-5/16" , with total length 350"
- Ice bank - 53 lbs
- Ice sensor
- Foam in place insulated bath
- Submerged agitator pump
- Ideal beer flash cooler / beer flash chiller
Glycol Chiller Specs | |
---|---|
Maximum Distance | 25' |
Capacity | 3100 BTU/hr evap 20f |
Glycol Tank Capacity | 7500 BTU/hr |
Dedicated Circuit | 15 amp |
Voltage | 115/60 Volt/Hz |
Compressor Power | 1/2hp |
Pump Type | FloJet SPC42 Procon/ Totton |
Pump Flow Rate | 240 Gal/Hr |
Refrigerant | R134a |
Dimensions | |
---|---|
Height | 23" |
Width | 32" |
Depth | 19" |
Weight | |
---|---|
Unit Weight | 125 lbs |
Shipping Weight | 136 lbs |
Labor - 12 Months
Parts - 12 Months
Compressor - 72 Months
The compressor is covered for 5 years from the date of purchaseBe the first to ask a question.
No customer reviews available.