Single Faucet Kegerator Beer Dispensers
Dual Faucet Two Tap Kegerators
Triple Faucet Three Tap Kegerators
Undercounter Built-In Kegerators
Outdoor Kegerator Beer Dispensers
Commercial Kegerators
Mini Kegerators
Cold Brew & Nitro Coffee Dispenser Kegerators
Carbonated Water Kegerators
Home Brew Kegerators
15" Kegerators
Kombucha Equipment
Guinness® Dispensing Kegerators
Vending Kegerators
Wine Kegerators
Kegerator Cabinets
Kegerator Covers and Accessories
Kegerators
Kegerator Conversion Kits
Kegs & Keg Accessories
Beer Faucets
Beer Shanks
Draft Beer Towers
Keg Taps Couplers
Regulators & Gas Equipment
Beer & Gas Line Hose
Co2 and Nitrogen Air Tanks
Beer Line Cleaning Equipment
Drip Trays
System Fittings
Jockey Boxes
Keg Beer Party Pumps
Glassware
Guinness® Dispensing Equipment
Remote Glycol Systems
Wine Cooler Refrigerators
Wine Cellar Cabinets
Wine Racks
Cooling Units
Wine Dispensing Systems
Wine Accessories
Howard Miller Wine & Spirits Furniture
Wine Making
Nitro Hot Draft System
Ready to Drink Bag-in-a-Box Coffee Dispensing Equipment
Nitrogen Infusers
Nitrogen Tanks & Generators
Nitrogen Beer Regulators
Nitro Cold Brew Coffee Kegs
Cold Brewed Coffee Tools
Espresso Machines
Cleaning Equipment
Outdoor Appliances
ADA Appliances
Panel Ready Appliances
Commercial Grade Appliances
Beverage Centers
Refrigerators
Drawer Refrigerators
Ice Makers
Water Dispensers & Accessories
Freezers
Home Brew Equipment Kits
Fermentation Equipment
Boiling and Mashing Equipment
Home Brew Beer Kegs
Home Brew Kegerator Conversion Kits
Brewing Tools
Home Brew Ingredients
Cleaning Chemicals
Test Equipment
Home Brew Beer Bottles and Bottling Equipment
Brewery Fittings
Draft Beer Equipment
Homebrewing Equipment
Wine Equipment
Luxury Appliances and Refrigeration
Coffee Equipment
Kombucha
The Beverage Blog
Frequently Asked Beer Questions
Shop by Brand
Shop by Category
Brass Bent Tailpiece for 1/4 Inch ID Vinyl Tubing
Model: BTP-14
- Bent tailpiece with 1/4" barb
- Fits a 1/4" I.D. vinyl beer hose
- Made of chrome-plated brass
- Use on shanks or couplers for a smooth 90° bend
- Helps you avoid kinked beer lines
A bent tailpiece features a 90° bend to provide a smooth, unhindered beer flow and to avoid kinked hoses. This chrome-plated brass bent tailpiece fits a 1/4" I.D. vinyl hose.
WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.- Use on Shanks or Couplers for Smooth 90° Bend
- Avoid Kinked Beer Lines
- Fits 1/4" I.D. Vinyl Beer Hose
- Made of Chrome-Plated Brass
Be the first to ask a question.
A bent tailpiece features a 90° bend to provide a smooth, unhindered beer flow and to avoid kinked hoses. This chrome-plated brass bent tailpiece fits a 1/4" I.D. vinyl hose.
WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.- Use on Shanks or Couplers for Smooth 90° Bend
- Avoid Kinked Beer Lines
- Fits 1/4" I.D. Vinyl Beer Hose
- Made of Chrome-Plated Brass
04/03/2018
Excellent Well Priced Product AlGreat item as it allows for a beer line to be attached at an angle. I had a bit of a difficulty. As I understand, a beer line is 1/4 of an inch and the airlines are 5/1 to match the keg coupling. I got one of each instead of 2 each 1/4 diameter. Not a problem. Beverage Factory replaced the part at no charge. great customer Support and technical staff.
Be the first to ask a question.
04/03/2018
Excellent Well Priced Product
AlGreat item as it allows for a beer line to be attached at an angle. I had a bit of a difficulty. As I understand, a beer line is 1/4 of an inch and the airlines are 5/1 to match the keg coupling. I got one of each instead of 2 each 1/4 diameter. Not a problem. Beverage Factory replaced the part at no charge. great customer Support and technical staff.