- Comes complete with a 2-tap keg beer dispense system that features 100% stainless steel contact
- Can be converted into an all-refrigerator using the two included adjustable shelves for additional refrigerated storage
- Spacious interior can accommodate full-size kegs (15.5 gallon), 1/4 beer barrels (7.75 gallon), and 5 gallon kegs
- Stylish black cabinet with reversible black door, removable drip tray, chrome guard rail, and textured serving countertop
- PLEASE NOTE: Coors kegs will not fit in this keg refrigerator
Dimensions: 33" H x 20" W x 25.5" D
This K199B-2NK Full Size Keg Beer Refrigerator from Kegco houses your kegs in a beautiful all-black cabinet and comes equipped with a Kegco Exclusive 14" tall dual tap draft tower. It also comes with two removable wire shelves that allow you to convert this keg fridge into an all-refrigerator or beverage center when you need additional cold storage. 2-1/2" casters let you move the beer keg dispenser anywhere you need it, from the bar to the living room to the patio.
Kegco has packed this K199B-2NK with many convenient features that give you the most for your money. A steel interior floor mat ensures long-lasting durability, while also allowing your kegs to glide easily when sliding them in and out of the cabinet. The textured serving countertop has an attractive metal safety rail that keeps your glasses and beer mugs from sliding off, and the easy-to-clean removable drip tray collects drips and spills to keep cleaning to a minimum. This beer cooler was designed to be ultra-quiet and 25% more energy efficient, making it ideal for use in the home.
This beer cooler was designed to be ultra-quiet and 25% more energy efficient, making it ideal for use in the home. This keg cooler can accommodate one full size, straight pony, or quarter slim keg, or up to two sixth slim, strap handle, or rubber home brew kegs. PLEASE: It will not fit bevel or rubber kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller brewing companies.
- MDK-199B-01 Kegerator with Dual Faucet Dispense System
- Includes a brand new 5 lb. Aluminum CO2 Tank
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill. - Includes Commercial Grade Dual Gauge Two Product CO2 Regulator
The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg. - Includes two 5 foot lengths of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
These standard 5 foot lengths of 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design. - Includes two D system lever handle keg couplers
These commercial grade lever handle keg couplers work with all American "D" system Sankey kegs. They feature 55-psi pressure relief valves and nickel-plated forged brass bodies. To tap a keg, simply pull out and then down on the lever handle. - Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear beer tubing. Th3 tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers to allow you to easily fill tall growlers and pint glasses. - PLEASE NOTE: Coors Kegs will not fit into this Kegerator.
- Measures at 33"H x 20"W x 25.5"D
- Reversible Door
- the Kegco K199B-1 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator.
- Includes 2 Full-width Wire Shelves
- Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Removable Drip Tray with Grill to Collect spills
- Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
- Steel interior floor mat for long lasting durability and easy glide of beer keg.
- Textured serving counter top.
- 25% more energy efficient design saves you money each month
- UL Listed
Warranty Information:
- 1 Year Parts and Labor
- 5 Years on Compressor (parts only)
Brand | Full Size | Pony Size | Quarter slim | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|---|---|---|
Kegco K199 |
1 | 1 | 1 | 2 | 2 | 2 | 2 |
Kegco K209 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco K309 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco VSK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco SLK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco Z163 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Kegco HK38 |
1 | 1 | 2 | 3 | 3 | 3 | 3 |
Kegco XCK-1 |
1 | 1 | 2 | 4 | 4 | 4 | 4 |
Summit SBC677 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Summit SBC635 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Haier Kegerator |
1 | 1 | 2* | 2 | 3 | 3 | 3 |
Danby Kegerator |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
All Marvel Kegerators |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Perlick HP15T |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Perlick HP24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
Perlick HC24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
UBC Kegmaster |
1 | 1 | 2 | 4** | 3 | 4** | 4** |
Beverage Air BM23 |
1 | 1 | 2 | 3 | 4 | 4 | 4 |
Everest EBD1 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Brand | Full Size | Pony Size | Quarter slim |
---|---|---|---|
Kegco K199 |
1 | 1 | 1 |
Kegco K209 |
1 | 1 | 1 |
Kegco K309 |
1 | 1 | 1 |
Kegco VSK-15 |
0 | 0 | 0 |
Kegco SLK-15 |
0 | 0 | 0 |
Kegco Z163 |
1 | 1 | 1 |
Kegco HK38 |
1 | 1 | 2 |
Kegco XCK-1 |
1 | 1 | 2 |
Summit SBC677 |
1 | 1 | 1 |
Summit SBC635 |
1 | 1 | 1 |
Haier Kegerator |
1 | 1 | 2* |
Danby Kegerator |
1 | 1 | 1 |
All Marvel Kegerators |
1 | 1 | 1 |
Perlick HP15T |
0 | 0 | 0 |
Perlick HP24T |
0 | 1 | 0 |
Perlick HC24T |
0 | 1 | 0 |
UBC Kegmaster |
1 | 1 | 2 |
Beverage Air BM23 |
1 | 1 | 2 |
Everest EBD1 |
1 | 1 | 1 |
Brand | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|
Kegco K199 |
2 | 2 | 2 | 2 |
Kegco K209 |
2 | 3 | 3 | 3 |
Kegco K309 |
2 | 3 | 3 | 3 |
Kegco VSK-15 |
1 | 1 | 1 | 1 |
Kegco SLK-15 |
1 | 1 | 1 | 1 |
Kegco Z163 |
2 | 3 | 2 | 3 |
Kegco HK38 |
3 | 3 | 3 | 3 |
Kegco XCK-1 |
4 | 4 | 4 | 4 |
Summit SBC677 |
2 | 3 | 2 | 3 |
Summit SBC635 |
2 | 3 | 3 | 3 |
Haier Kegerator |
2 | 3 | 3 | 3 |
Danby Kegerator |
2 | 3 | 2 | 3 |
All Marvel Kegerators |
2 | 3 | 3 | 3 |
Perlick HP15T |
1 | 1 | 1 | 1 |
Perlick HP24T |
2 | 2 | 1 | 2 |
Perlick HC24T |
2 | 2 | 1 | 2 |
UBC Kegmaster |
4** | 3 | 4** | 4** |
Beverage Air BM23 |
3 | 4 | 4 | 4 |
Everest EBD1 |
2 | 3 | 3 | 3 |
* - Using Wood riser for front keg
** - With external CO2 tank (3 with internal CO2 tank)
Dimensions | |
---|---|
Height | 33" |
Width | 20' |
Depth | 25 1/2" |
Weight | |
---|---|
Unit Weight | 95 lbs. |
Shipping Weight | 110 lbs. |
Warranty | |
---|---|
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Exterior | |
---|---|
Cabinet | Black Cabinet |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Keg Storage Capacities | |
---|---|
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 2 |
5 gal. Ball/Pin Lock Keg | Holds 2 |
5-Liter / Mini Keg | Holds 2 |
Key Features | |
---|---|
Built-in Capable | No |
Keg Coupler | D System |
Security Lock | No |
Regulator | Dual Gauge Two Product |
CO2 Tank | 5 lb. |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Door | |
---|---|
Color / Material | Stainless Steel |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Draft Beer Tower | |
---|---|
Number of Faucets | 2 Faucet |
Material | Stainless Steel |
Height | 14.25" |
Diameter | 3" |
Cooling System | |
---|---|
Type | Compressor |
Front Ventilation | No |
Controls | |
---|---|
Adjustable Thermostat | Yes |
Digital | No |
Electrical | |
---|---|
Electrical Requirements | 115 V, 60 Hz |
Labor - 12 Months
LIMITED ONE YEAR WARRANTYFor one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
Parts - 60 Months
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
Additional Details
WHAT IS NOT COVERED:- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
10/28/2016
Kegco is a boss TboneEverything was packaged good everything looked great and the best thing about it is that everything was their and worked perfectly was drinking ice cold beer in just a couple of hours very very satisfied I would do it again in a heart beat
08/29/2016
GREAT! MattPours perfectly!
04/05/2016
Tight Fit Timwith in 8 hours the temperature in the kegerator was 32F. thermometer in glass of water and ice was forming in cup. To get two five gallon corny keg is a tight fit with gas and beer lines. I'm in the process of replacing the air splitter with a tee so I can move the regulator and co2 tank to outside of the kegerator.
03/25/2016
Good kegerator JimQuick shipping and no damage.
Very good packaging and easy to assemble.
Everything is in the box.
You want Co2? Take the valve off of the tank and crush 5 lbs of dry ice, dump into tank and Wella. Leave the valve open until you have it retightened. I put 6.1 lbs in the tank and it is a happy camper.
If you are not mechanically inclined don't.
Check ALL of your tubing connections.
Nice cold beer on tap.
Enjoy
unfortunately Sellet is not a brand we carrier, did you by chance mean Summit? if so there number is 1-800-287-8799. Hope this helped and thank you for your question.
Thank you,
Yes but you would have to clean the beverage lines as well as transition from Nitro to Co2. We would need to get a Co2 tank and well as a Co2 regulator. Possibly other pieces in order to make this happen but you could make it work. Hope this helped and thank you for your question.
Thank you,
12/20/2016
Great productNice light unit,compact,rolls easily,best of all,keeps my beer at 36 degrees,and still has knob left!!!