Rebate Available

Kegco 24" Wide Dual Tap Black Kegerator

Model: K209B-2NK
86 Reviews
$1,529.00SAVE 45% - $688.05
$840.95

+ FREE SHIPPING

90 Day Money Back Guarantee

Color

Taps

2 Tap
2 Tap
$840.95
IN STOCK (usually ships within 24 hours)
DESCRIPTION
FEATURES
SPECS
WARRANTY
INFO & GUIDES
REVIEWS
Q&A
  • Comes complete with a two product direct draw kit that features 100% stainless steel contact components
  • Includes chrome guardrail, easy roll locking casters, manual thermostat, and dishwasher safe removable built-in drip tray
  • One of the largest interior capacities on the market, large enough to hold all full size kegs (including Coors and Miller)
  • Spacious interior easily accommodates one 1/2-barrel or 1/4-barrel, two 1/6-barrel, or three home brew kegs
  • Can be converted into an all-refrigerator using the two included adjustable shelves for additional refrigerated storage

    Dimensions: 33.25" H x 24" W x 25" D

Kegco's K209B-2NK Two Tap Keg Beer Dispenser is a high-quality beer refrigerator that stores your kegs in a sleek all-black cabinet with a Kegco Exclusive 14" tall dual faucet draft beer tower. It has a large interior that can easily accommodate one full size, pony, or quarter slim keg, two 5 gallon commercial kegs along with one 5 gallon home-brew keg, or up to three 5 gallon home-brew kegs, and the stainless steel interior floor mat provides extra durability by displacing the weight of your kegs evenly over the floor of the cabinet. When you aren't using this keg refrigerator to dispense beer, the two included adjustable wire shelves allow you to convert the unit into a regular all-refrigerator or beverage center to provide additional refrigerated storage space.

All stainless contact single tap dispense system includes tower, regulator, keg coupler, and CO2 tank

Kegco's K209B-2NK Beer Keg Cooler has been specially designed to be quiet and energy efficient enough for home use. Easy-roll casters allow you to move this kegerator from room to room wherever and whenever you need it, and the casters lock to prevent the unit from rolling again once you have it where you want it. The recessed drip tray has a plastic grill that can be taken out and cleaned in the dishwasher, making the mess of sticky dried beer a thing of the past. An attractive and easy-to-install chrome safety rail also helps to keep mess to a minimum by preventing your mugs and glasses from sliding off and breaking.

  • MDK-209B-01 Two-Faucet Draft Beer Dispensers with Two-Tap Draft Beer Dispensing Equipment
  • Includes a brand new 5 lb. Aluminum CO2 Tank
    This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
  • Includes Commercial Grade Dual Gauge Two Product CO2 Regulator
    The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
  • Includes two 5 foot lengths of 5/16 Inch I.D. Blue Air Line Assembly with Snap Clamps
    These standard 5 foot lengths of 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
  • Includes two D system lever handle keg couplers
    These commercial grade lever handle keg couplers work with all American "D" system Sankey kegs. They feature 55-psi pressure relief valves and nickel-plated forged brass bodies. To tap a keg, simply pull out and then down on the lever handle.
  • Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower
    This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included. The Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft towers to allow you to easily fill tall growlers and pint glasses.
  • All dispensing accessories are UL recognized components
  • Converts to refrigerator 2 full-width wire shelves
  • Large enough to hold all full size kegs (Including Coors, Miller and many additional brands)
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) and 1/6 barrels (5gal)
  • Matte black cabinet and door
  • Thermostatic temperature control keeps temperature in range of 35°F-42°F
  • Maximum Ambient Temperature: 100 degrees Fahrenheit
  • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
  • Easy roll casters for mobility
  • Removable built-in drip tray with grill to collect spills
  • Chrome guard rail to protect your mugs and glasses from sliding off
  • Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
  • Plugs into standard home outlet
  • Adjustable mechanical temperature control (easily accessed at the back of the unit)
  • 25% more energy efficient design saves you money each month!
  • CSA Listed

Warranty Information:

  • 1 Year Parts and Labor
  • 5 Years on Compressor (parts only)
Full Size Keg Pony Size Keg Quarter Slim Keg 5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Brand Full Size Pony Size Quarter slim 5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Kegco
K199
1 1 1 2 2 2 2
Kegco
K209
1 1 1 2 3 3 3
Kegco
K309
1 1 1 2 3 3 3
Kegco
VSK-15
0 0 0 1 1 1 1
Kegco
SLK-15
0 0 0 1 1 1 1
Kegco
Z163
1 1 1 2 3 2 3
Kegco
HK38
1 1 2 3 3 3 3
Kegco
XCK-1
1 1 2 4 4 4 4
Summit
SBC677
1 1 1 2 3 2 3
Summit
SBC635
1 1 1 2 3 3 3
Haier
Kegerator
1 1 2* 2 3 3 3
Danby
Kegerator
1 1 1 2 3 2 3
All Marvel
Kegerators
1 1 1 2 3 3 3
Perlick
HP15T
0 0 0 1 1 1 1
Perlick
HP24T
0 1 0 2 2 1 2
Perlick
HC24T
0 1 0 2 2 1 2
UBC
Kegmaster
1 1 2 4** 3 4** 4**
Beverage Air
BM23
1 1 2 3 4 4 4
Everest
EBD1
1 1 1 2 3 3 3
Full Size Keg Pony Size Keg Quarter Slim Keg
Brand Full Size Pony Size Quarter slim
Kegco
K199
1 1 1
Kegco
K209
1 1 1
Kegco
K309
1 1 1
Kegco
VSK-15
0 0 0
Kegco
SLK-15
0 0 0
Kegco
Z163
1 1 1
Kegco
HK38
1 1 2
Kegco
XCK-1
1 1 2
Summit
SBC677
1 1 1
Summit
SBC635
1 1 1
Haier
Kegerator
1 1 2*
Danby
Kegerator
1 1 1
All Marvel
Kegerators
1 1 1
Perlick
HP15T
0 0 0
Perlick
HP24T
0 1 0
Perlick
HC24T
0 1 0
UBC
Kegmaster
1 1 2
Beverage Air
BM23
1 1 2
Everest
EBD1
1 1 1
5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Brand 5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Kegco
K199
2 2 2 2
Kegco
K209
2 3 3 3
Kegco
K309
2 3 3 3
Kegco
VSK-15
1 1 1 1
Kegco
SLK-15
1 1 1 1
Kegco
Z163
2 3 2 3
Kegco
HK38
3 3 3 3
Kegco
XCK-1
4 4 4 4
Summit
SBC677
2 3 2 3
Summit
SBC635
2 3 3 3
Haier
Kegerator
2 3 3 3
Danby
Kegerator
2 3 2 3
All Marvel
Kegerators
2 3 3 3
Perlick
HP15T
1 1 1 1
Perlick
HP24T
2 2 1 2
Perlick
HC24T
2 2 1 2
UBC
Kegmaster
4** 3 4** 4**
Beverage Air
BM23
3 4 4 4
Everest
EBD1
2 3 3 3

* - Using Wood riser for front keg

** - With external CO2 tank (3 with internal CO2 tank)

UPC: 810033763724
Dimensions
Height33.25"
Width24"
Depth25"
Weight
Unit Weight96.8 lbs
Shipping Weight110 lbs
Warranty
Labor1 Year
Parts1 Year
Compressor (Parts Only)5 Years
Exterior
CabinetBlack
Drip TrayYes
Guard RailYes
CastersYes
Keg Storage Capacities
Full Size / 1/2-Barrel1
Pony Size / 1/4-Barrel1
1/4-Barrel Slim1
1/6-Barrel2
5 gal. Ball/Pin Lock Keg3
Key Features
Built-in CapableNo
Keg CouplerD System
Security LockNo
RegulatorDual Gauge Two Product
CO2 Tank5 lb.
Cleaning KitOptional Add-On
Outdoor UseNo
Commercial UseNo
Door
Color / MaterialMatte Black
Number of Doors1
Door HandleRecessed
Field ReversibleYes
Accepts Custom Overlay PanelNo
Draft Beer Tower
Number of Faucets2
MaterialStainless Steel
Height14.25"
Diameter3"
Cooling System
TypeCompressor
Defrost SystemManual
Front VentilationNo
Controls
Adjustable ThermostatYes
DigitalNo
Electrical
Electrical Requirements115 V / 60 Hz
Running Amps1.7 A

Labor - 12 Months

LIMITED ONE YEAR WARRANTY

For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

Parts - 60 Months

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:

For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.

Additional Details

WHAT IS NOT COVERED:
  • Content losses of food or other, due to spoilage.
  • Incidental or consequential damages.
  • Parts and labor costs for the following will not be considered as warranty:
    • Door springs, and/or frames.
    • Inner door panels, door rails and/or door supports.
    • Light bulbs and/or plastic housing.
    • Plastic cabinet liners.
    • Punctured evaporator that voids the warranty on the complete sealed system.
    • Repairs performed by unauthorized servicers.
    • Shipping and handling costs associated with the replacement of the unit.
    • Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
    • Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
    • Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
    • Replacement of house fuses or resetting circuit breakers.
  • Failure of the product if it is used for other than its intended purpose.
  • This warranty does not apply outside the Continental USA.

06/11/2013

My new favorite kegerator
Beeroholic

This is my fourth kegerator, so I feel like I have a pretty good idea of what I'm talking about at this point. I've had a Danby and a Haier and my dad has had a Beverage Air so those are the brands I'm comparing it to. I got the Haier first and it lasted for a couple years but the beer always seemed to be a bit foamy. I was an impatient idiot and instead of waiting for it to defrost, I tried chipping the ice off of the plate in the back and punctured it, causing all the liquid to leak out. I bought the Danby next because it had a digital temp display which I thought would be cool. Well, the digital temp display just told me that it didn't get very cold. I had more foam and talking to the folks at Beverage Factory, found out that if beer is not cold enough, that causes foam. I couldn't get it to go any colder, so I sold it and bought the Kegco. I've had it for a couple months and couldn't be happier. It really gets cold! I measured the temp down below 30 at it's coldest setting so I actually had to turn it up a bit. I really like the look of it and the built in drip tray is easy to clean and allows plenty of room between the top of the kegerator and the faucet. I would say it gets every bit as cold as my dad's commercial grade Beverage Air but it doesn't sound like a jet engine! (his kegerator is LOUD!) I see that Kegco has a digital kegerator out now so maybe I ordered a little too soon, but maybe I'll sell this one and buy it later! Overall, I'm very happy with the performance.

06/10/2013

Cold and good shipping
M Busch

After reading a lot of reviews about kegerators I decided to call Beverage Factory. This model was recommended to me for the best value. I was told that the K209SS has a thermostat designed to make the kegerator run at colder temperatures. That is correct I don't know the temperature inside, but, the beer is very cold and I don't have foam issues like some other reviews I have read. It was easy to assemble probably took about 30 minutes and the flush drip tray is a cool little extra. For the money it was great value.

I ordered on a Saturday it took 5 business days to me with the appt. I set-up.

06/10/2013

Good Unit
Stylin

The Kegco 209 has kept my beer ice cold with nice smooth pours. Looking like great beer and times in my future.

06/09/2013

Saving Money Beer Tastes Better
J Esposito

For the price, this kegerator is the best option. I already have recommended to my friends. I have already drunk quite a few kegs before this review. All the kegs have been super cold and the beer super tasty. I am saving big time by buying kegs over beer bottles. Less mess and less recycling makes it even nicer. I have to adjust the CO2 pressure over time as sometimes. Overall this unit has been a breeze to operate and maintain.

05/07/2013

Coors cooler
Good Friend

My friend works at Coors and is able to get me a free keg from time to time so I needed a kegerator that would fit their keg with no problems and this one was recommended. When it arrived, I got it set up quickly and as advertised, had no problems fitting the Coors keg inside. One thing to watch out for - when i first hooked it up, I figured I'd turn it to it's highest setting because I love cold beer and I've seen other kegerators that struggle to maintain the right temp. Well, I ended up freezing my first keg because this thing got colder than I expected. The thermometer was reading 23 degrees at the 6 setting, so I moved it to between 4 and 5 and it's right around 32. It's perfect!

Showing Reviews 71-75 of 86
First   13 14 15 16 17   Last
Question:
Are the three handle pulls screw on so I could switch them out for a branded handle if wanted?
by Beer Guy on November 13, 2018
Answer:
Hello Beer Guy,

Yes you can attach a branded handle so no worries on that end. Hope this help and thank you for your question.

Thank you,
by Hector on November 14, 2018
Staff Answer
Question:
Can the kegco Model:K209B-1 be safely put under a counter?? It looks like it is the same size as the "built-in" models on this site, if not just touch smaller. Didn't look like there was any real difference in specs/size btw the built in models and this model?
by B on December 29, 2018
Answer:
This model is meant to be used in a freestanding application. It will require a minimum of 3" of air space on the rear and each side to allow for proper air circulation around the compressor.
by Nick on January 02, 2019
Staff Answer
Question:
Can I fit 5 corny’s Plus a 5lb CO2 tank inside?
by BJ on February 27, 2019
Answer:
No, the most you can fit is 3 cornys and a tank
by Dave on March 13, 2019
Staff Answer
Question:
Can one of the faucets be swapped out for a stout?
by Nitrobro on March 02, 2019
Answer:
Yes, the connection points are all universal so you can have them switched if you call in and do an order with anyone in our sales department.
by Dave on March 06, 2019
Staff Answer
Question:
Will this unit hold Miller/Coors kegs?
by TLS on June 02, 2019
Answer:
yes this unit will fit a coors miller keg.
by Dave on June 04, 2019
Staff Answer
Showing Questions 1-5 of 20
 1 2 3   Last

Select Options & Upgrades

SELECT TOWER
SELECT KEG COUPLER
SELECT CO2 REGULATOR
SELECT CO2 TANK
OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
OPTIONAL STAINLESS STEEL DRIP TRAY
ADD RESIDENTIAL KEGERATOR COVER
CUSTOMIZE
Optional Extended Warranty
Kegco 24" Wide Dual Tap Black Kegerator $1,529.00 SAVE 45% - $688.05 $840.95
Kegco K209B-2 Keg Fridge
OPTIONS SUMMARY
SELECT TOWER
14" Stainless Steel Tower with Stainless Steel Faucets (included)
SELECT KEG COUPLER
Kegco KT85D-L D System Keg Couplers (included)
SELECT CO2 REGULATOR
Kegco 762-2 Commercial Grade Dual Gauge Two Product Regulator (included)
SELECT CO2 TANK
5 lb. Aluminum Co2 Tank (included)
OPTIONAL CLEANING KIT (IMPORTANT TO CLEAN LINES AFTER EACH KEG)
No Cleaning Kit Added
OPTIONAL STAINLESS STEEL DRIP TRAY
ADD RESIDENTIAL KEGERATOR COVER
None Selected
CUSTOMIZE
None Selected
OPTIONAL EXTENDED WARRANTY
I don't want an extended warranty
Base Price
$840.95
Options
Total

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....