- This Kegco HBK209B-1NK kegerator includes a Kegco Exclusive 14" tall single tap draft tower, one faucet with faucet knob, and 5 feet of 3/16" I.D. clear beer tubing
- Extra large interior space of this unit is large enough to house three 5 gallon Cornelius kegs along with a CO2 tank
- Design features like a matte black finish with locking wheels and a removable, dishwasher-safe drip tray make it versatile and functional within your home
- Energy efficient design will leave a minimal impact on the environment and your electric bill
- Can be converted into an all-refrigerator using the two included adjustable shelves for additional refrigerated storage
Dimensions: 33.25" H x 24" W x 25" D
The best part of homebrewing is being able to offer friends and family the fruits of your labor cold and fresh from the tap. The worst part is running out of your chilled home brew mid-way through the party! Make sure that never happens again by investing in or upgrading to the HBK209B-1NK Beer Dispenser offered by the Beverage Factory. This full size home brew kegerator is perfect for the serious home brewer or the beer connoisseur who likes to have more than one keg chilled and ready to serve at a time.
Finished in matte black, this cooler is less prone to showing finger prints and smudges and the neutral color and design makes it easy to incorporate into any environment. With features like manual thermostat control and energy efficient design, you can adjust the temperature of your keg to enhance the flavor and consistency of the brews you are serving at any given time with minimal impact on the environment or your energy bill. The HBK209B-1NK is mounted on 4 locking casters so you can easily move it from the kitchen to the home bar. It has a removable flush-mount drip tray mounted in the top that collects spills and can be easily cleaned in the dishwasher. It also comes with 2 removable shelves so while you're waiting for your next batches of home brew to finish fermenting, your keg cooler can double as a regular refrigerator or drink cooler too!
- Converts to refrigerator 2 full-width wire shelves
- Large enough to hold all full size commercial kegs or up to three 5 gallon Cornelius ball lock kegs
- Matte black cabinet and door
- Thermostatic temperature control keeps temperature in range of 35°F-42°F
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Easy roll casters for mobility
- Removable built-in drip tray with grill to collect spills
- Chrome guard rail to protect your mugs and glasses from sliding off
- Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
- Plugs into standard home outlet
- Adjustable mechanical temperature control (easily accessed at the back of the unit)
- 25% more energy efficient design saves you money each month!
- CSA Listed
Warranty Information:
- 1 Year Parts and Labor
- 5 Years on Compressor (parts only)
Brand | Full Size | Pony Size | Quarter slim | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|---|---|---|
Kegco K199 |
1 | 1 | 1 | 2 | 2 | 2 | 2 |
Kegco K209 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco K309 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco VSK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco SLK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco Z163 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Kegco HK38 |
1 | 1 | 2 | 3 | 3 | 3 | 3 |
Kegco XCK-1 |
1 | 1 | 2 | 4 | 4 | 4 | 4 |
Summit SBC677 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Summit SBC635 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Haier Kegerator |
1 | 1 | 2* | 2 | 3 | 3 | 3 |
Danby Kegerator |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
All Marvel Kegerators |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Perlick HP15T |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Perlick HP24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
Perlick HC24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
UBC Kegmaster |
1 | 1 | 2 | 4** | 3 | 4** | 4** |
Beverage Air BM23 |
1 | 1 | 2 | 3 | 4 | 4 | 4 |
Everest EBD1 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Brand | Full Size | Pony Size | Quarter slim |
---|---|---|---|
Kegco K199 |
1 | 1 | 1 |
Kegco K209 |
1 | 1 | 1 |
Kegco K309 |
1 | 1 | 1 |
Kegco VSK-15 |
0 | 0 | 0 |
Kegco SLK-15 |
0 | 0 | 0 |
Kegco Z163 |
1 | 1 | 1 |
Kegco HK38 |
1 | 1 | 2 |
Kegco XCK-1 |
1 | 1 | 2 |
Summit SBC677 |
1 | 1 | 1 |
Summit SBC635 |
1 | 1 | 1 |
Haier Kegerator |
1 | 1 | 2* |
Danby Kegerator |
1 | 1 | 1 |
All Marvel Kegerators |
1 | 1 | 1 |
Perlick HP15T |
0 | 0 | 0 |
Perlick HP24T |
0 | 1 | 0 |
Perlick HC24T |
0 | 1 | 0 |
UBC Kegmaster |
1 | 1 | 2 |
Beverage Air BM23 |
1 | 1 | 2 |
Everest EBD1 |
1 | 1 | 1 |
Brand | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|
Kegco K199 |
2 | 2 | 2 | 2 |
Kegco K209 |
2 | 3 | 3 | 3 |
Kegco K309 |
2 | 3 | 3 | 3 |
Kegco VSK-15 |
1 | 1 | 1 | 1 |
Kegco SLK-15 |
1 | 1 | 1 | 1 |
Kegco Z163 |
2 | 3 | 2 | 3 |
Kegco HK38 |
3 | 3 | 3 | 3 |
Kegco XCK-1 |
4 | 4 | 4 | 4 |
Summit SBC677 |
2 | 3 | 2 | 3 |
Summit SBC635 |
2 | 3 | 3 | 3 |
Haier Kegerator |
2 | 3 | 3 | 3 |
Danby Kegerator |
2 | 3 | 2 | 3 |
All Marvel Kegerators |
2 | 3 | 3 | 3 |
Perlick HP15T |
1 | 1 | 1 | 1 |
Perlick HP24T |
2 | 2 | 1 | 2 |
Perlick HC24T |
2 | 2 | 1 | 2 |
UBC Kegmaster |
4** | 3 | 4** | 4** |
Beverage Air BM23 |
3 | 4 | 4 | 4 |
Everest EBD1 |
2 | 3 | 3 | 3 |
* - Using Wood riser for front keg
** - With external CO2 tank (3 with internal CO2 tank)
Dimensions | |
---|---|
Height | 33.25" |
Width | 24" |
Depth | 25" |
Weight | |
---|---|
Unit Weight | 96.8 lbs |
Shipping Weight | 110 lbs |
Warranty | |
---|---|
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Key Features | |
---|---|
Built-in Capable | No |
Keg Coupler | Optional Add-On |
Security Lock | No |
Regulator | Optional Add-On |
CO2 Tank | Optional Add-On |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Keg Storage Capacities | |
---|---|
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 2 |
5 gal. Ball/Pin Lock Keg | Holds 3 |
5-Liter / Mini Keg | Holds 3 |
Exterior | |
---|---|
Cabinet | Black |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Draft Beer Tower | |
---|---|
Number of Faucets | 1 |
Material | Chrome |
Height | 14.25" |
Diameter | 3" |
Door | |
---|---|
Color / Material | Stainless Steel |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Cooling System | |
---|---|
Type | Compressor |
Defrost System | Manual |
Front Ventilation | No |
Controls | |
---|---|
Adjustable Thermostat | Yes |
Digital | No |
Electrical | |
---|---|
Electrical Requirements | 115V / 60HZ |
Running Amps | 1.7A |
Labor - 12 Months
LIMITED ONE YEAR WARRANTYFor one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
Parts - 60 Months
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
Additional Details
WHAT IS NOT COVERED:- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
06/10/2013
Cold and good shipping M BuschAfter reading a lot of reviews about kegerators I decided to call Beverage Factory. This model was recommended to me for the best value. I was told that the K209SS has a thermostat designed to make the kegerator run at colder temperatures. That is correct I don't know the temperature inside, but, the beer is very cold and I don't have foam issues like some other reviews I have read. It was easy to assemble probably took about 30 minutes and the flush drip tray is a cool little extra. For the money it was great value.
I ordered on a Saturday it took 5 business days to me with the appt. I set-up.
06/10/2013
Good Unit StylinThe Kegco 209 has kept my beer ice cold with nice smooth pours. Looking like great beer and times in my future.
06/09/2013
Saving Money Beer Tastes Better J EspositoFor the price, this kegerator is the best option. I already have recommended to my friends. I have already drunk quite a few kegs before this review. All the kegs have been super cold and the beer super tasty. I am saving big time by buying kegs over beer bottles. Less mess and less recycling makes it even nicer. I have to adjust the CO2 pressure over time as sometimes. Overall this unit has been a breeze to operate and maintain.
05/07/2013
Coors cooler Good FriendMy friend works at Coors and is able to get me a free keg from time to time so I needed a kegerator that would fit their keg with no problems and this one was recommended. When it arrived, I got it set up quickly and as advertised, had no problems fitting the Coors keg inside. One thing to watch out for - when i first hooked it up, I figured I'd turn it to it's highest setting because I love cold beer and I've seen other kegerators that struggle to maintain the right temp. Well, I ended up freezing my first keg because this thing got colder than I expected. The thermometer was reading 23 degrees at the 6 setting, so I moved it to between 4 and 5 and it's right around 32. It's perfect!
Yes you can attach a branded handle so no worries on that end. Hope this help and thank you for your question.
Thank you,
06/11/2013
My new favorite kegeratorThis is my fourth kegerator, so I feel like I have a pretty good idea of what I'm talking about at this point. I've had a Danby and a Haier and my dad has had a Beverage Air so those are the brands I'm comparing it to. I got the Haier first and it lasted for a couple years but the beer always seemed to be a bit foamy. I was an impatient idiot and instead of waiting for it to defrost, I tried chipping the ice off of the plate in the back and punctured it, causing all the liquid to leak out. I bought the Danby next because it had a digital temp display which I thought would be cool. Well, the digital temp display just told me that it didn't get very cold. I had more foam and talking to the folks at Beverage Factory, found out that if beer is not cold enough, that causes foam. I couldn't get it to go any colder, so I sold it and bought the Kegco. I've had it for a couple months and couldn't be happier. It really gets cold! I measured the temp down below 30 at it's coldest setting so I actually had to turn it up a bit. I really like the look of it and the built in drip tray is easy to clean and allows plenty of room between the top of the kegerator and the faucet. I would say it gets every bit as cold as my dad's commercial grade Beverage Air but it doesn't sound like a jet engine! (his kegerator is LOUD!) I see that Kegco has a digital kegerator out now so maybe I ordered a little too soon, but maybe I'll sell this one and buy it later! Overall, I'm very happy with the performance.