- This Kegco HBK209S-2NK kegerator includes a Kegco Exclusive 14" tall dual tap draft tower, two faucets with faucet knobs, and two 5 foot lengths of 3/16" I.D. clear beer tubing
- Stainless steel finish is durable and neutral so it will fit into any room of your home
- Extra large interior space of this unit is large enough to house three 5 gallon Cornelius kegs and a tank of CO2
- Comes with two adjustable shelves that allow you to convert it into an all-refrigerator for extra food and beverage storage
- Features a chrome guard rail, easy-roll locking casters, and dishwasher-safe removable built-in drip tray for easy clean-up
Dimensions: 33.25" H x 24" W x 25" D
Create a tasting room experience for your homebrew by serving it from the HBK209S-2NK dual faucet home brew kegerator. With the large interior and dual faucet design, this kegerator can easily accommodate two kegs of your homebrew and can serve from both of them at once. You will be able to offer your guests a selection of your homebrew creations with draft beer freshness and coolness. Guests will be able to observe the clarity and hue of your brew, get a fuller experience of the aroma by drinking it out of a glass instead of a bottle, and enjoy perfect temperature and effervescence every time.
A textured top surface and guard rail that lines the top helps prevent spillage and knocked over glasses. A dishwasher safe drip tray that sits under the faucet help catch drips and spills and is dishwasher safe which makes cleaning very easy. The kegerator also comes with two removable racks so it can be used as a regular refrigerator or a cooler for other drinks like sodas, waters, and juices, when it's not being used to store and serve your homebrew. Standing on 4 locking castors, this kegerator is easy to relocate around your home for parties and get-togethers or to make cleaning more convenient. The stainless steel plate that lines the bottom of the cooler makes sure that the weight of your kegs is evenly distributed so that the lining will not become damaged.
- Converts to refrigerator 2 full-width wire shelves
- Large enough to hold all full size commercial kegs or up to three 5 gallon ball lock kegs
- Matte black cabinet and stainless steel door
- Thermostatic temperature control keeps temperature in range of 35°F-42°F
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Easy roll casters for mobility
- Removable built-in drip tray with grill to collect spills
- Chrome guard rail to protect your mugs and glasses from sliding off
- Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
- Plugs into standard home outlet
- Adjustable mechanical temperature control (easily accessed at the back of the unit)
- 25% more energy efficient design saves you money each month!
- CSA Listed
Warranty Information:
- 1 Year Parts and Labor
- 5 Years on Compressor (parts only)
Brand | Full Size | Pony Size | Quarter slim | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|---|---|---|
Kegco K199 |
1 | 1 | 1 | 2 | 2 | 2 | 2 |
Kegco K209 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco K309 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco VSK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco SLK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco Z163 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Kegco HK38 |
1 | 1 | 2 | 3 | 3 | 3 | 3 |
Kegco XCK-1 |
1 | 1 | 2 | 4 | 4 | 4 | 4 |
Summit SBC677 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Summit SBC635 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Haier Kegerator |
1 | 1 | 2* | 2 | 3 | 3 | 3 |
Danby Kegerator |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
All Marvel Kegerators |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Perlick HP15T |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Perlick HP24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
Perlick HC24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
UBC Kegmaster |
1 | 1 | 2 | 4** | 3 | 4** | 4** |
Beverage Air BM23 |
1 | 1 | 2 | 3 | 4 | 4 | 4 |
Everest EBD1 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Brand | Full Size | Pony Size | Quarter slim |
---|---|---|---|
Kegco K199 |
1 | 1 | 1 |
Kegco K209 |
1 | 1 | 1 |
Kegco K309 |
1 | 1 | 1 |
Kegco VSK-15 |
0 | 0 | 0 |
Kegco SLK-15 |
0 | 0 | 0 |
Kegco Z163 |
1 | 1 | 1 |
Kegco HK38 |
1 | 1 | 2 |
Kegco XCK-1 |
1 | 1 | 2 |
Summit SBC677 |
1 | 1 | 1 |
Summit SBC635 |
1 | 1 | 1 |
Haier Kegerator |
1 | 1 | 2* |
Danby Kegerator |
1 | 1 | 1 |
All Marvel Kegerators |
1 | 1 | 1 |
Perlick HP15T |
0 | 0 | 0 |
Perlick HP24T |
0 | 1 | 0 |
Perlick HC24T |
0 | 1 | 0 |
UBC Kegmaster |
1 | 1 | 2 |
Beverage Air BM23 |
1 | 1 | 2 |
Everest EBD1 |
1 | 1 | 1 |
Brand | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|
Kegco K199 |
2 | 2 | 2 | 2 |
Kegco K209 |
2 | 3 | 3 | 3 |
Kegco K309 |
2 | 3 | 3 | 3 |
Kegco VSK-15 |
1 | 1 | 1 | 1 |
Kegco SLK-15 |
1 | 1 | 1 | 1 |
Kegco Z163 |
2 | 3 | 2 | 3 |
Kegco HK38 |
3 | 3 | 3 | 3 |
Kegco XCK-1 |
4 | 4 | 4 | 4 |
Summit SBC677 |
2 | 3 | 2 | 3 |
Summit SBC635 |
2 | 3 | 3 | 3 |
Haier Kegerator |
2 | 3 | 3 | 3 |
Danby Kegerator |
2 | 3 | 2 | 3 |
All Marvel Kegerators |
2 | 3 | 3 | 3 |
Perlick HP15T |
1 | 1 | 1 | 1 |
Perlick HP24T |
2 | 2 | 1 | 2 |
Perlick HC24T |
2 | 2 | 1 | 2 |
UBC Kegmaster |
4** | 3 | 4** | 4** |
Beverage Air BM23 |
3 | 4 | 4 | 4 |
Everest EBD1 |
2 | 3 | 3 | 3 |
* - Using Wood riser for front keg
** - With external CO2 tank (3 with internal CO2 tank)
Dimensions | |
---|---|
Height | 33.25" |
Width | 24" |
Depth | 25" |
Weight | |
---|---|
Unit Weight | 96.8 lbs |
Shipping Weight | 110 lbs |
Warranty | |
---|---|
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Key Features | |
---|---|
Built-in Capable | No |
Keg Coupler | Optional Add-On |
Security Lock | No |
Regulator | Optional Add-On |
CO2 Tank | Optional Add-On |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Keg Storage Capacities | |
---|---|
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 2 |
5 gal. Ball/Pin Lock Keg | Holds 3 |
Exterior | |
---|---|
Cabinet | Black |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Draft Beer Tower | |
---|---|
Number of Faucets | 2 |
Material | Chrome |
Height | 14.5" |
Diameter | 3" |
Door | |
---|---|
Color / Material | Stainless Steel |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Cooling System | |
---|---|
Type | Compressor |
Defrost System | Manual |
Front Ventilation | No |
Controls | |
---|---|
Adjustable Thermostat | Yes |
Digital | No |
Electrical | |
---|---|
Electrical Requirements | 115V / 60HZ |
Running Amps | 1.7A |
Labor - 12 Months
LIMITED ONE YEAR WARRANTYFor one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
Parts - 60 Months
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
Additional Details
WHAT IS NOT COVERED:- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
08/06/2015
I would tell my friends to buy this one DonThis thing came by truck in about a week which was faster than I expected. Only took me about 15 min. to put it together. Let it cool for 24 hours then put a keg in it. Have been maintaining 31 degrees which seems right for me. This is my second one from beverage factory, great people to deal with. When this one wears out will buy from them again.
06/24/2015
Love it! Deanwaited two weeks from date of order, once it was delivered, took 15 minutes to setup, let it sit for 24hours before I put a 1/6 barrel in it, not even on the coldest setting and the beer is ice cold, upgraded the tower and could not be happier, should have done this along time ago, upgraded to better gauges as well, should have got dual gauges though, all in all worth every penny.
05/29/2015
Perfect Inside and Out AsihaI did a lot of research and read a lot of reviews before making my purchase. In the end, I found that the Kegco K209SS-2 2-Faucet Kegerator was going to be my best bet for getting the best Kegerator for my money. Overall, setup was very easy, came with everything we needed, and it's a damn good looking fridge. Love the dual taps and the option to put 2 smaller kegs in the refrigerator to mix up the beer selection. Once we got a keg in it, it seemed to take about 24 hours to get back to temperature, once it did, it poured great and the beer temp was spot on.
Hi Asiha, thank you for your feedback on your new kegerator. I'm glad to hear you are enjoying the look of the fridge and the setup was easy. We do recommend putting your new full kegs in the kegerator for several hours in order to fully cool down to temperature and let them settle, just like you did. We're here if you have any questions or needs in the future. Thank you, again!
05/28/2015
Simple, Simple, Simple! AngelI put this together myself in 15 minutes! It's that simple. I would like to think I'm a handy female after putting this thing together even changing door direction, took 15 minutes. It really is simple. I hooked up the the CO 2 and turned dial on double regulator that I added and it was perfect just by me turning it all the way up. It's around 10 now and I was told between 10 and 12 I'm great so I never did a thing after turning dial. Beer is so cold. I put kegerator together, plugged it in, bought the beer, put kegs in kegerator and waited a day to tap them so kegs settled. Worked perfect. I researched for days before this purchase and almost bought a cheap one from Wal Mart for 400.00. Reviews had problems with CO2 regulating. This kegerator I'm telling anyone to pay extra for no hassles, ice cold beer, stainless steel, and a double tap. I have Miller Lite and Land Shark now and both pour perfect! Don't hesitate with this purchase! Only problem I had was bottom of door was dented and after contacting company immediately and sending pics they discounted kegerator. It was a nice size foot dent but I covered it with a magnet and opted for discount although they would have sent a brand new one out!
We're so happy to hear you are enjoying your new kegerator and you were able to put it together so easily! Thank you for the great feedback and of course let us know if there is anything else we can help you with.
08/22/2015
Best Choice For KegeratorBeverage Factory was quick to answer questions I had about included parts. They make sure all pieces necessary are provided. Nice looking and more space then other brands I looked at. I upgraded to Perlick 630ss faucets and 762-2 regulator both of which operate very smooth. I have thermostat set on "4" which is getting a glass of water to 34 degrees. Still waiting on kegs to stabilize before actually pouring a beer. So far very impressed with quality of components and Beverage Factory for making assembly easy with necessary parts. Definitely happy with purchase.