Kegco 24" Wide Homebrew Dual Tap Black Commercial Built-In Right Hinge Kegerator

Model: HBHK38BSU-2

29 Reviews

$2,728.00SAVE 45% - $1227.60

$1,500.40

+ FREE SHIPPING

Cabinet Color

Black

$1,500.40

Stainless Steel

$1,601.92

Taps

1 Tap

$1,455.85

2 Tap

$1,500.40

3 Tap

$1,542.75

Hinge

Right

$1,500.40

Left

$1,500.40

IN STOCK (usually ships within 24 hours)

DESCRIPTION

FEATURES

SPECS

INFO & GUIDES

REVIEWS

Q&A

Specially designed to meet the unique requirements of dispensing home brew beer from two ball lock kegs
Dual tap dispense system consists of stainless steel and food grade plastic to ensure cleanliness
Front-venting design allows homebrew kegerator to be built into cabinetry with a seamless look that is easy to maintain and provides more floor space
Enough floor space to house a full size keg, two quarter slim kegs, or up to three 5 gallon kegs for a variety of configurations
Kit includes Kegco Exclusive 14" tall draft tower, two stainless steel faucets, keg couplers, CO2 regulator, and CO2 tank

Dimensions: 34-1/8" H x 24" W x 25" D

With a versatile design, easy-to-use controls, and a quality dispense system, this stylish Kegco HBHK38BSU-2 Dual Faucet Digital Undercounter Homebrew Kegerator is the best two-tap built-in beer dispenser available for your home bar, kitchen, or game room. At 3200 BTUs, it boasts the most powerful compressor in its class, delivering unbeatable cooling for fast recovery and temperature pulldown. The wide available temperature range allows it to be set between 32 and 59 degrees Fahrenheit, giving you the option of serving cold beer, coffee, kombucha, or even wine straight from a keg.

A premium kegerator should have premium components, and the two tap draft dispense system included with the HBHK38BSU-2 features the very best parts at the very best value.

X-CLUSIVE Dispense System includes tower, drip tray, cleaning kit, regulator, keg coupler, and CO2 tank

The Kegco Exclusive 14" tall double faucet stainless steel draft tower with two stainless steel faucets ensures your beer only touches 100% stainless steel metal components for the ultimate in sanitation. A two product Premium dual gauge regulator is also included, so you'll always know when it's time for the corrosion-resistant, electric red epoxy-coated CO₂ tank to be refilled. The included ball lock keg couplers will allow you to tap ball lock home brew kegs. The premium draft parts included in Kegco's exclusive direct draw kit give you the peace of mind of knowing that your beer is being served at its optimum quality.

The front-venting design allows you to build this kegerator into cabinetry for a seamless look that is easy to maintain and provides more floor space. A stainless steel guard rail is included to prevent glasses or mugs from sliding off the top in freestanding applications.

Easily adjust and view the set temperature, toggle between Celsius and Fahrenheit, or turn the interior light on and off with the push of a button. The controls can be accessed effortlessly at the front of the cabinet, out of the way of the dispense system.

The beautiful stainless steel interior is more durable than the plastic liner found in many competing models and easy to clean. Enough floor space is provided to house a full size keg, two quarter slim kegs or up to three 5 gallon kegs for a variety of configurations. PLEASE NOTE: Will not hold 50L European kegs.

Two adjustable wire shelves are included, allowing you to convert these beer dispensers into refrigerators when you are in need to extra cold storage. Shelf adjustment is easily done in 1/2" increments so you can space them according to your needs.

14 inch stainless steel tower comes longer than most standard towers giving you more than enough space to fill up your pint glass or growler. Comes equipped with two metal faucets and is compatible with all standard keg couplers.

Forced air refrigeration ensures that cold air is evenly distributed throughout the cabinet so there are no hot spots. Cold air is directed into the beer tower, ensuring that the lines are cool all the way up to the faucet so there's less foam between pours.

Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Premium Double Gauge CO₂ Regulator with Air Splitter
This two product regulator works with any CO₂ tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO₂ pressure is inside of the kegs. The side gauge measures the remaining volume of CO₂ in the tank, so you'll know when it's about time to get the tank filled. This regulator has an air splitter with two shut-off valves to deliver CO₂ to one or two kegs at the same pressure, and features a large hand control that makes it easy to adjust the pressure inside of the keg.
Includes Two 5 Foot Lengths of 5/16 Inch I.D. Blue Air Line Assembly with 4 Plastic Snap Clamps
This standard length 5 foot 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assemblies come with two plastic snap clamps with a reusable clamp design.
Includes two sets of Ball Lock Home Brew Keg Couplers
Each set includes both a gas in and a beer out coupler that work with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16 inch I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
All dispensing accessories are UL recognized components
Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
Large enough to hold most full size kegs, including Coors and Miller. Interior height is a limitation, so kegs that are taller than the standard half barrel (23.25") may not fit with the keg coupler installed. We have run into this issue with certain German kegs along with the M system coupler, but most major brands in D and S System kegs will not be an issue.
Holds (1) full-size keg, (2) quarter slim kegs, (3) 5 gallon commercial kegs, or (3) 5 gallon home brew kegs
PLEASE NOTE: Will not hold 50L European kegs
Sleek black cabinet with stylish stainless steel door
Digital temperature control keeps temperature between 32-59 degrees Fahrenheit
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
A perfect option for dispensing beer, soda, kombucha, wine or cold brew coffee
Stainless steel guard rail helps prevent mugs and glasses from sliding off
Stainless steel interior is more durable than the plastic liner found in most kegerators
Plugs into standard home outlet
UL, NSF-7 & ETL Sanitation listed

UPC: 810069433790

Dimensions
Height	34-1/8"
Width	24"
Depth	25" (without Handle)

Weight
Unit Weight	115 lbs.

Warranty
Labor	1 Year
Parts	1 Year
Compressor (Parts Only)	5 Years

Key Features
Built-in Capable	Yes
Keg Coupler	Optional Add-On
Security Lock	Yes
Regulator	Optional Add-On
CO2 Tank	Optional Add-On
Cleaning Kit	Optional Add-On
Outdoor Use	No
Commercial Use	Yes

Keg Storage Capacities
Full Size / 1/2-Barrel	1
1/4-Barrel Slim	2
1/6-Barrel	3
5 gal. Ball/Pin Lock Keg	3

Exterior
Cabinet	Black
Drip Tray	Yes
Guard Rail	Yes
Casters	No

Draft Beer Tower
Number of Faucets	2
Material	Chrome
Height	12.25"
Diameter	3"

Door
Color / Material	Stainless Steel
Number of Doors	1
Door Handle	Towel Bar AND Curved
Field Reversible	No
Accepts Custom Overlay Panel	No

Cooling System
Type	Compressor
Defrost System	Automatic
Front Ventilation	Yes

Controls
Adjustable Thermostat	Yes
Digital	Yes

Electrical
Electrical Requirements	110v/60hz
Running Amps	1.0 A

User Manual Digital Controller Manual Parts Diagram Dispense Kit Assembly Manual Pressurized Cleaning Kit Manual Energy Guide Material Safety Data Sheet Correct Installation

07/27/2023

Replacement

Beer guy

Had my first keg I about 5 years and it started to creep up in temperature Got the new unit and the beer is ice cold again

10/09/2021

I would certainly buy this again, no pro

GPA John

Looks great in my bar, perfect height for the built in unit. Customer service has been fantastic since I ordered many other kegging supplies and a few were overlooked in packing. Just 1 phone call was needed to make the order correct and items were shipped that day. I would give them a overall rating of A+++.

09/11/2021

Great Kegerator

Rick

Easy to put together. Keeps beer very cold. THis is the 3rd kegerator I’ve owned and by far the best built, easiest to assemble. The beer temp is consistent. Nice and cold at 32 degrees. The thermostat is digital and very easy to read and set, so you get the exact temperature that you want. It is a bit trick getting two 1/2 kegs in there, but they do fit. The door is spring loaded, so the unit is always shut. Worth the extra money. I highly recommend this model.

08/11/2021

Great Kegerator!

SJFK24

Really nice dual tap system. Easy to set-up and use.

07/07/2021

Almost perfect

Steve

Installed this kegerator under a kitchen counter and it fit perfectly. It only took 30 minutes for the unit to cool to 33 degrees and it maintains that temperature. I have 2 comments which keep the kegerator from 5 stars. First, the handle cannot be attached since the provided bolts are not long enough to reach through the thickness of the door. The holes are also hard to find and require pulling on the rubber seal which is not something you would normally want to do. Second, there is a hose which hangs from the cooling fan area in the inside back of the unit. A users manual picture suggests that this is to be fed into the tower (to cool the tower?) but it is not mentioned anywhere in any of the manuals. Great looking unit and very quiet. I would recommend this to others.

Showing Reviews 1-5 of 29

Question:

How is the gap between the Kegerator and countertop sealed? I plan on installing under my granite countertop. Will the purchase include all parts/equipment to seal this gap so cool air does not escape?

by AJ on August 17, 2020

Answer:

Hello, this is not a super difficult process to do, but it is going to be much easier to explain over the phone. Please give us a call at 800-710-9939 when you can, and we can go over the installation process and materials needed.

by Dakota on August 18, 2020

Staff Answer

Question:

Do I need any additional accessories if I want to keep Guinness on one of the taps at all times?

by Guinness guy on September 27, 2020

Answer:

This kit is currently built to work with beverages that dispense using C02, for Guinness you'll want to use nitrogen, so this would require swapping some parts out to get the desired kit. If you can make the time, call our sales line, at 800-710-9939 M-F between 7a-4p PST, and a sales person would be happy to get you all the right equipment!

by Dakota on September 28, 2020

Staff Answer

Question:

Do you offer a black stainless steel door for this model? I would like it to match my other appliances. Thanks.

by DV on October 29, 2020

Answer:

Unfortunately, for now this unit is only offered in a standard brushed stainless finish. Please let us know if you have any further questions!

by Nick on October 29, 2020

Staff Answer

Question:

will it hold the oversized coors/miller lite kegs?

by matt on June 03, 2021

Answer:

The HK38 will hold those Coors and Miller Lite kegs.

by Jake on January 05, 2022

Staff Answer

Question:

My question is about the HK38BSU-2. When this is installed under a countertop, how far off the back wall is the hole in the countertop? What is the diameter of the needed hole?

by Jason on March 23, 2022

Answer:

Please refer to the cut sheet on page 9 of the manual for tower hole location. No more than a 2.5in hole is needed on the countertop for the lines and tower cooling tube.
https://www.beveragefactory.com/images/guides/HK38-manual_V8102620145929.pdf

by Jake on March 29, 2022

Staff Answer

Showing Questions 96-100 of 108