Kegco 24" Wide Homebrew Triple Tap Black Commercial Built-In Left Hinge Kegerator

Model: HBHK38BSU-L-3

29 Reviews

$2,805.00SAVE 45% - $1262.25

$1,542.75

+ FREE SHIPPING

Cabinet Color

Black

$1,542.75

Stainless Steel

$1,645.92

Taps

3 Tap

$1,542.75

Hinge

Right

$1,542.75

Left

$1,542.75

IN STOCK (usually ships within 24 hours)

DESCRIPTION

FEATURES

SPECS

INFO & GUIDES

REVIEWS

Q&A

Specially designed to meet the unique requirements of dispensing home brew beer from three ball lock kegs
Triple tap dispense system consists of stainless steel and food grade plastic to ensure cleanliness
Front-venting design allows homebrew kegerator to be built into cabinetry with a seamless look that is easy to maintain and provides more floor space
Enough floor space to house a full size keg, two quarter slim kegs, or up to three 5 gallon kegs for a variety of configurations
Kit includes Kegco Exclusive 14" tall draft tower, three stainless steel faucets, keg couplers, CO2 regulator, and CO2 tank

Dimensions: 34-1/8" H x 24" W x 25" D

Kegco's stylish HBHK38BSU-L-3 Three Faucet Digital Undercounter Homebrew Kegerator features a versatile design, easy-to-use controls, and a high-performance dispense system that make it the very best three-tap built-in beer dispenser on the market to complete your home bar, kitchen, or game room. At 3200 BTUs, it has the most powerful compressor in its class, boasting unparalleled cooling for fast recovery and temperature pulldown. The 32-59 F available temperature range is one of the widest on the market, giving you the freedom to serve cold beer, coffee, kombucha, or even wine straight from the keg.

A premium kegerator should have only the highest quality components, so Kegco has included a premium direct draw kit with the HBHK38BSU-L-3 that has been specially designed to give you the most convenient and reliable draft beer parts at an unbeatable value.

The Kegco Exclusive triple faucet polished stainless steel beer tower has an extra 14.5" height that takes the hassle out of filling growlers and tall pint glasses. Three stainless steel faucets ensure that your beer only touches 100% stainless steel metal components for the ultimate in sanitation. A Premium dual gauge regulator is included, so you'll always know when its time for your corrosion-resistant, electric red epoxy-coated CO₂ tank to be refilled. The included ball lock keg couplers will allow you to tap ball lock home brew kegs. Thanks to the premium draft parts included in Kegco's exclusive direct draw kit, you can be confident in every step of your beer's journey from the keg to your glass!

Built-in Or Freestanding Use

The front-venting design allows you to build this kegerator into cabinetry for a seamless look that is easy to maintain and provides more floor space. A stainless steel guard rail is included to prevent glasses or mugs from sliding off the top in freestanding applications.

Digital Temperature Display

Easily adjust and view the set temperature, toggle between Celsius and Fahrenheit, or turn the interior light on and off with the push of a button. The controls can be accessed effortlessly at the front of the cabinet, out of the way of the dispense system.

Stainless Steel Interior

The beautiful stainless steel interior is more durable than the plastic liner found in many competing models and easy to clean. Enough floor space is provided to house a full size keg, two quarter slim kegs or up to three 5 gallon kegs for a variety of configurations. PLEASE NOTE: Will not hold 50L European kegs.

Converts to a Refrigerator

Two adjustable wire shelves are included, allowing you to convert these beer dispensers into refrigerators when you are in need to extra cold storage. Shelf adjustment is easily done in 1/2" increments so you can space them according to your needs.

Locking Stainless Steel Door

The attractive stainless steel door includes a lock to keep the contents secure. Both a towel bar and a curved handle are provided, so you can choose which option best matches your furnishings. A door alarm will sound if the door is left open too long.

Air Cooled Tower Prevents Foam

Forced air refrigeration ensures that cold air is evenly distributed throughout the cabinet so there are no hot spots. Cold air is directed into the beer tower, ensuring that the lines are cool all the way up to the faucet so there's less foam between pours.

Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in electric red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO₂ regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Premium Double Gauge CO₂ Regulator with Air Distributor
The regulator works with any CO₂ tank with a CGA-320 valve and measures PSI, as well as the volume of the CO₂ gas in the cylinder. It has a pressure release valve and a large hand control that makes it easy to adjust the pressure inside of the keg. This regulator comes with a three-way air distributor with three shut-off valves to deliver CO₂ to up to three kegs at the same pressure.
Includes three 5 foot lengths of 5/16" I.D. Blue Air Line Assembly with 2 Plastic Snap Clamps each
This standard length 5 foot 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes three sets of Ball Lock Home Brew Keg Couplers
Each set includes both a gas in and a beer out coupler that work with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
Includes a Kegco Exclusive 14.5" tall, 3" diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter triple faucet metal draft tower made of polished stainless steel. It comes complete with three stainless steel faucets and three 5 foot lengths of 3/16" I.D. clear beer tubing. The extra tall 14.5" height makes it easier to fill growlers and tall pint glasses. This tower is mounted using the gasket and four screws that are included.
All dispensing accessories are UL recognized components
Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
Large enough to hold most full size kegs, including Coors and Miller. Interior height is a limitation, so kegs that are taller than the standard half barrel (23.25" may not fit with the keg coupler installed. We have run into this issue with certain German kegs along with the M system coupler, but most major brands in D and S System kegs will not be an issue.
Holds (1) full-size keg, (2) quarter slim kegs, (3) 5 gallon commercial kegs, or (3) 5 gallon home brew kegs
PLEASE NOTE: Will not hold 50L European kegs
Sleek black cabinet with stylish stainless steel door
Digital temperature control keeps temperature between 32-59 degrees Fahrenheit
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
A perfect option for dispensing beer, soda, kombucha, wine or cold brew coffee
Stainless steel guard rail helps prevent mugs and glasses from sliding off
Stainless steel interior is more durable than the plastic liner found in most kegerators
Plugs into standard home outlet
UL, NSF-7 & ETL Sanitation listed

UPC: 810069433820

Dimensions
Height	34-1/8"
Width	24"
Depth	25" (without Handle)

Weight
Unit Weight	115 lbs.

Warranty
Labor	1 Year
Parts	1 Year
Compressor (Parts Only)	5 Years

Key Features
Built-in Capable	Yes
Keg Coupler	Yes
Security Lock	Yes
Regulator	Yes
CO2 Tank	Yes
Cleaning Kit	Optional Add-On
Outdoor Use	No
Commercial Use	Yes

Keg Storage Capacities
Full Size / 1/2-Barrel	1
1/4-Barrel Slim	2
1/6-Barrel	3
5 gal. Ball/Pin Lock Keg	3

Exterior
Cabinet	Black
Drip Tray	Yes
Guard Rail	Yes
Casters	No

Draft Beer Tower
Number of Faucets	3
Material	Chrome
Height	12.25"
Diameter	3"

Door
Color / Material	Stainless Steel
Number of Doors	1
Door Handle	Towel Bar AND Curved
Field Reversible	No
Accepts Custom Overlay Panel	No

Cooling System
Type	Compressor
Defrost System	Automatic
Front Ventilation	Yes

Controls
Adjustable Thermostat	Yes
Digital	Yes

Electrical
Electrical Requirements	110v/60hz
Running Amps	1.0 A

User Manual Parts Diagram Dispense Kit Assembly Manual Pressurized Cleaning Kit Manual Energy Guide Material Safety Data Sheet Correct Installation

07/27/2023

Replacement

Beer guy

Had my first keg I about 5 years and it started to creep up in temperature Got the new unit and the beer is ice cold again

10/09/2021

I would certainly buy this again, no pro

GPA John

Looks great in my bar, perfect height for the built in unit. Customer service has been fantastic since I ordered many other kegging supplies and a few were overlooked in packing. Just 1 phone call was needed to make the order correct and items were shipped that day. I would give them a overall rating of A+++.

09/11/2021

Great Kegerator

Rick

Easy to put together. Keeps beer very cold. THis is the 3rd kegerator I’ve owned and by far the best built, easiest to assemble. The beer temp is consistent. Nice and cold at 32 degrees. The thermostat is digital and very easy to read and set, so you get the exact temperature that you want. It is a bit trick getting two 1/2 kegs in there, but they do fit. The door is spring loaded, so the unit is always shut. Worth the extra money. I highly recommend this model.

08/11/2021

Great Kegerator!

SJFK24

Really nice dual tap system. Easy to set-up and use.

07/07/2021

Almost perfect

Steve

Installed this kegerator under a kitchen counter and it fit perfectly. It only took 30 minutes for the unit to cool to 33 degrees and it maintains that temperature. I have 2 comments which keep the kegerator from 5 stars. First, the handle cannot be attached since the provided bolts are not long enough to reach through the thickness of the door. The holes are also hard to find and require pulling on the rubber seal which is not something you would normally want to do. Second, there is a hose which hangs from the cooling fan area in the inside back of the unit. A users manual picture suggests that this is to be fed into the tower (to cool the tower?) but it is not mentioned anywhere in any of the manuals. Great looking unit and very quiet. I would recommend this to others.

Showing Reviews 1-5 of 29

Question:

How is the gap between the Kegerator and countertop sealed? I plan on installing under my granite countertop. Will the purchase include all parts/equipment to seal this gap so cool air does not escape?

by AJ on August 17, 2020

Answer:

Hello, this is not a super difficult process to do, but it is going to be much easier to explain over the phone. Please give us a call at 800-710-9939 when you can, and we can go over the installation process and materials needed.

by Dakota on August 18, 2020

Staff Answer

Question:

Do I need any additional accessories if I want to keep Guinness on one of the taps at all times?

by Guinness guy on September 27, 2020

Answer:

This kit is currently built to work with beverages that dispense using C02, for Guinness you'll want to use nitrogen, so this would require swapping some parts out to get the desired kit. If you can make the time, call our sales line, at 800-710-9939 M-F between 7a-4p PST, and a sales person would be happy to get you all the right equipment!

by Dakota on September 28, 2020

Staff Answer

Question:

Do you offer a black stainless steel door for this model? I would like it to match my other appliances. Thanks.

by DV on October 29, 2020

Answer:

Unfortunately, for now this unit is only offered in a standard brushed stainless finish. Please let us know if you have any further questions!

by Nick on October 29, 2020

Staff Answer

Question:

will it hold the oversized coors/miller lite kegs?

by matt on June 03, 2021

Answer:

The HK38 will hold those Coors and Miller Lite kegs.

by Jake on January 05, 2022

Staff Answer

Question:

My question is about the HK38BSU-2. When this is installed under a countertop, how far off the back wall is the hole in the countertop? What is the diameter of the needed hole?

by Jason on March 23, 2022

Answer:

Please refer to the cut sheet on page 9 of the manual for tower hole location. No more than a 2.5in hole is needed on the countertop for the lines and tower cooling tube.
https://www.beveragefactory.com/images/guides/HK38-manual_V8102620145929.pdf

by Jake on March 29, 2022

Staff Answer

Showing Questions 96-100 of 108