- Comes complete with a Kegco Exclusive 14" tall three tap draft tower, three faucets with faucet knobs, and three 5 foot lengths of 3/16" I.D. clear beer tubing
- Spacious interior easily accommodates up to three home brew kegs and can also be used as a fermentation chamber or an all-refrigerator
- Can be converted into an all-refrigerator using the 2 included adjustable shelves for additional refrigerated storage
- Features digital temperature controls, fan forced cooling, and one of the largest temperature ranges on the market (32-75°F)
- Includes chrome guardrail, easy-roll locking casters, and dishwasher-safe removable built-in drip tray for easy cleaning
Dimensions: 33.25" H x 24" W x 25" D
Kegco's HBK309B-3NK Three Faucet Digital Homebrew Kegerator adds digital functionality and a wider available temperature range to one of the best kegerators you can find. Your favorite features from our other high-quality Kegco Draft Beer Dispensers are still included, such as attractive styling, a removable and easy to clean built-in drip tray, a chrome guard rail to prevent your glasses from sliding off the top, and easy rolling casters that allow you to move the unit from room to room with ease. Now, in addition to having a wider available temperature range for more precise temperature control, you also have the ability to view your specific temperature setting and easily set it with the push of a button.
Digital Temperature Control
With this homebrew keg refrigerator, you no longer have to guess what temperature the numbers on a manual dial will produce. Enjoy precise temperature control thanks to a digital temperature display and push-button controls, which make it easy to set and verify the internal temperature. Simply press the up or down button, and the temperature is adjusted by one degree. The clear LED display can be set to show the temperature in either Fahrenheit or Celsius.
Wide Enough Temperature Range to Dispense or Ferment
Fan-forced cooling gives this kegerator one of the coldest temperature ranges of any keg cooler on the market today, and helps to ensure even cooling throughout the cabinet. It can be set as low as 32 degrees to dispense ice-cold home-brewed beer, or as high as 75 degrees to act as a fermentation chamber, allowing you to control your brew's fermentation environment to produce consistent results batch after batch.
Large Interior
The HBK309B-3NK's spacious interior allows you to simultaneously store and dispense up to three 5-gallon ball lock homebrew kegs. If you'll be using it as a fermentation chamber, it can also hold a 6-gallon bucket or carboy.
Deep Chill Function
If you find yourself needing to quickly cool down a warm beer keg, simply press the Deep Chill button to activate this kegerator's Deep Chill function. This function forces the compressor to work continuously for 24 hours to bring your keg down to the desired temperature, and can be easily turned off again with another push of the button to return your unit to its regular operation.
Converts to a Refrigerator with 2 Shelves
When you're not using the HBK309B-3NK to dispense home-brew beer, it can be easily converted into an all-refrigerator for extra refrigerated storage. Two adjustable shelves are included with each unit, and can be placed far enough apart to accommodate gallon jugs or 2-liter soda bottles. You can even use this unit to store bottles of wine thanks to the wide available temperature range!
Locking Casters Provide Mobility
Smooth-rolling casters make it easy to move this kegerator to the game room, dining room, or backyard patio, so you can enjoy your homebrew wherever and whenever you want it. Once they are in place, the casters can be locked down so that they won't roll again until you want them to.
Kegco's Home Brew Beer Kegerator comes with a Kegco Exclusive 14" tall triple tap draft tower, three faucets with faucet knobs, and three 5 foot lengths of 3/16" I.D. clear beer tubing. Choose from the optional add-ons below to customize a homebrew dispense system setup that's just right for you.
* - Letting the Deep Chill function run for the full 24 hours may result in freezing of the keg.
- Holds up to three home brew beer kegs
- Matte black cabinet with matching door
- Digital temperature control keeps temperature in range of 32°F-75°F
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Can be set high enough for use as a fermentation chamber
- Deep chill function quickly cools down warm kegs
- Includes easy roll casters for mobility
- Removable built-in drip tray with grill collects drips and spills, and can be easily cleaned in the dishwasher
- Chrome guard rail helps prevent your mugs and glasses from sliding off
- Stainless steel interior floor mat ensures long lasting durability and allows kegs to easily glide in and out
- 25% more energy efficient design saves you money every month!
- Plugs into a standard home outlet
Warranty Information:
- 1 Year Parts and Labor
- 5 Years on Compressor (parts only)
Brand | Full Size | Pony Size | Quarter slim | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|---|---|---|
Kegco K199 |
1 | 1 | 1 | 2 | 2 | 2 | 2 |
Kegco K209 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco K309 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco VSK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco SLK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco Z163 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Kegco HK38 |
1 | 1 | 2 | 3 | 3 | 3 | 3 |
Kegco XCK-1 |
1 | 1 | 2 | 4 | 4 | 4 | 4 |
Summit SBC677 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Summit SBC635 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Haier Kegerator |
1 | 1 | 2* | 2 | 3 | 3 | 3 |
Danby Kegerator |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
All Marvel Kegerators |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Perlick HP15T |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Perlick HP24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
Perlick HC24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
UBC Kegmaster |
1 | 1 | 2 | 4** | 3 | 4** | 4** |
Beverage Air BM23 |
1 | 1 | 2 | 3 | 4 | 4 | 4 |
Everest EBD1 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Brand | Full Size | Pony Size | Quarter slim |
---|---|---|---|
Kegco K199 |
1 | 1 | 1 |
Kegco K209 |
1 | 1 | 1 |
Kegco K309 |
1 | 1 | 1 |
Kegco VSK-15 |
0 | 0 | 0 |
Kegco SLK-15 |
0 | 0 | 0 |
Kegco Z163 |
1 | 1 | 1 |
Kegco HK38 |
1 | 1 | 2 |
Kegco XCK-1 |
1 | 1 | 2 |
Summit SBC677 |
1 | 1 | 1 |
Summit SBC635 |
1 | 1 | 1 |
Haier Kegerator |
1 | 1 | 2* |
Danby Kegerator |
1 | 1 | 1 |
All Marvel Kegerators |
1 | 1 | 1 |
Perlick HP15T |
0 | 0 | 0 |
Perlick HP24T |
0 | 1 | 0 |
Perlick HC24T |
0 | 1 | 0 |
UBC Kegmaster |
1 | 1 | 2 |
Beverage Air BM23 |
1 | 1 | 2 |
Everest EBD1 |
1 | 1 | 1 |
Brand | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|
Kegco K199 |
2 | 2 | 2 | 2 |
Kegco K209 |
2 | 3 | 3 | 3 |
Kegco K309 |
2 | 3 | 3 | 3 |
Kegco VSK-15 |
1 | 1 | 1 | 1 |
Kegco SLK-15 |
1 | 1 | 1 | 1 |
Kegco Z163 |
2 | 3 | 2 | 3 |
Kegco HK38 |
3 | 3 | 3 | 3 |
Kegco XCK-1 |
4 | 4 | 4 | 4 |
Summit SBC677 |
2 | 3 | 2 | 3 |
Summit SBC635 |
2 | 3 | 3 | 3 |
Haier Kegerator |
2 | 3 | 3 | 3 |
Danby Kegerator |
2 | 3 | 2 | 3 |
All Marvel Kegerators |
2 | 3 | 3 | 3 |
Perlick HP15T |
1 | 1 | 1 | 1 |
Perlick HP24T |
2 | 2 | 1 | 2 |
Perlick HC24T |
2 | 2 | 1 | 2 |
UBC Kegmaster |
4** | 3 | 4** | 4** |
Beverage Air BM23 |
3 | 4 | 4 | 4 |
Everest EBD1 |
2 | 3 | 3 | 3 |
* - Using Wood riser for front keg
** - With external CO2 tank (3 with internal CO2 tank)
Dimensions | |
---|---|
Height | 33.25" |
Width | 24" |
Depth | 25" |
Weight | |
---|---|
Unit Weight | 97 lbs |
Shipping Weight | 110 lbs |
Warranty | |
---|---|
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Key Features | |
---|---|
Built-in Capable | No |
Keg Coupler | Optional Add-On |
Security Lock | No |
Regulator | Optional Add-On |
CO2 Tank | Optional Add-On |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Keg Storage Capacities | |
---|---|
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 3 |
5 gal. Ball/Pin Lock Keg | Holds 3 |
Exterior | |
---|---|
Cabinet | Black |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Draft Beer Tower | |
---|---|
Number of Faucets | 3 |
Material | Chrome |
Height | 14.50" |
Diameter | 3" |
Door | |
---|---|
Color / Material | Black |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Cooling System | |
---|---|
Type | Compressor |
Defrost System | Manual |
Front Ventilation | No |
Controls | |
---|---|
Adjustable Thermostat | Yes |
Digital | Yes |
Electrical | |
---|---|
Electrical Requirements | 115 V / 60 Hz |
Running Amps | 1.7A |
Labor - 12 Months
LIMITED ONE YEAR WARRANTYFor one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
Parts - 60 Months
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
Additional Details
WHAT IS NOT COVERED:- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
06/10/2015
Very happy so far PaulAfter reading the reviews here I decided to purchase this unit. Delivery went well, except that the delivery driver wouldn't stay until I had checked everything over for damage (even though the Beverage Factory instructions were very clear that the driver was required to do so). Luckily no damage was found and so I started putting everything together.
I had decided to upgrade to the Perlick 650SS faucets with flow control, and to my dismay once I installed them on the tower it was clear that there was very little room available to adjust the flow control because the 3 faucets were crammed so close together. I decided not to struggle with it and instead called Beverage Factory to arrange return of the tower that comes with this unit in exchange for the T-style tower (item TTOW-3F-SS). I figured the design of the T-style tower would work better with the 650SS faucets, and I was right. I still wish the faucets were placed about an inch further apart from one another on the TTOW-3F-SS, because that would allow more room for wider tap handles. There's certainly plenty of space available to have done this, so I'm not sure why the manufacturer didn't make better use of that space? But I can live with it as-is.
One other downside to the T-style tower is that it's not insulated at all. The tower that comes with this unit had thick felt insulation inside, so I'm not sure how that was overlooked on the T-style tower? I may need to carve out some styrofoam blocks and use them to fill the empty space in the TTOW-3F-SS, or maybe stuff some felt padding in there to provide the missing insulation.
Other than that, this kegerator runs very quietly, so much so that I sometimes have to check to see if it's still running! I put it in our dining room so that it wouldn't both us if it became noisy, but it's been very quiet so far. After 6 months everything still works great. And I love the digital controls that tell me the settings at a glance!
Only other points to mention are that the included hose clamps are cheap plastic; do yourself a favor and get a set of stainless steel earless clamps, to more securely attach your hoses to the keg connectors and your regulator. Also, the chill plate on the back wall of this kegerator gets very cold, so keep your beer lines away from it or else they'll freeze solid! One of mine did just that, and I couldn't figure out why nothing was dispensing!
All in all I'd say this is a well-made appliance and customer service was very good about handling my tower exchange. Recommended!
Hello Paul, thank you for your response and we are really glad to hear you have a had a good experience. Excellent choice in regards to the Perlick faucets and you are correct about the triple faucet tower not having enough space for that particular faucet. In reference to the insulating of the T-style tower I would use plumbers insulation inside that tower. Much thicker. Thanks again and we look forward to hearing from you in the future.
Carey Correia
06/04/2015
Liked it so much I bought another. AllenAfter several weeks of research and shopping I bought the K309SS-2 as a birthday present to myself over a year ago. I usually keep a slim quarter keg of commercial beer and a ball lock keg of homebrew in it. I'm very pleased with the amount of space, its ability to hold the correct temperature, the quality of manufacture, how quiet it is...the list goes on.
When I decided that I would like to start brewing more and needed a few more taps I considered cheaper alternatives since I already had such a nice kegerator in the 309, but I realized I wouldn't be happy with anything else after using this one. Today I finally pulled the trigger on a second. This time I got the K309SS-3 so I could keep an additional 3 ball lock kegs of homebrew on tap.
I recommend upgrading to Perlick faucets right off the bat. On my first 309 I ended up replacing the stock 5 foot beer lines with 12 foot lines. I ordered 36' of 3/16th beer line when I ordered my second 309 so I can go ahead and make that upgrade while the unit is new and dry. The longer beer lines allow you more flexibility with your carbonation level without worrying about foaming. Other than that this beauty is good to go. I can't wait to receive my second.
You know you want it. Do it.
03/25/2015
very nice product. joegot the cooler and was very easy to set up. it is nice looking and really keeps the beer cold. there is absolutely no noise coming from it. very, very quiet. I would highly recommend this item.
02/21/2015
Worth the extra money DanI hate giving anything 5 stars - just looks like I am over the top. And I did have one issue - the digital temp readout would show E1 when I tried to adjust the temp, the Deep Chill would work fine though. Called and spoke to Arielle who told me it sounded like a control board - shipped me a new one and that did the trick (I volunteered to install it myself). I retain 5 stars because of how great the customer service experience was. Been running 3 months now and here are the pros: Keeps temps to the exact degree - tested with water and a digital thermometer, it is quiet - really, I got the brushed tower with the perlick faucets - it looks great, chiller plate and fan cools down the interior fast, customer support is awesome. The cons - two 1/6 kegs are tight with all the associated hoses, The CO2 tank holder does very little and will not hold the tank at all, the plastic drip tray really does not reflect the awesome quality of this unit. Tips - Get the Perlick faucets - just do it! Order a cleaning kit now - you will anyway. Prosit!
This is an indication that your units compressor is getting too cold then warning up creating the full tray. I would suggest you empty out the tray and try to determinant how often the tray is filling up. Are there extreme weather issues happening lately in your area that could be effecting the unit? If you would like to give us a call and chat with our technical department or customer service we're available from 7-4 PST Monday-Friday.
Yes you can use it to dispense cider, i would look into seeing what PSI pressure Cider is dispensed at before doing so. I hope this helped and thank you for your question.
Thank you,
06/12/2015
Never leaving my house againThis thing is sweeeet. Delivery took slightly longer than anticipated (from California to NC, so I'll give them a pass), but the kegerator arrived undamaged to my threshold.
Set-up was easy. Automatic temp control is slick. Casters. I've been rotating craft 1/6 barrels. Love it.
I was getting too much head on my first few kegs, especially on the first pour of the day. After multiple attempts at adjusting pressure, I purchased a small tower chiller (~$40) that I turn on a few hours before I know I want to pour. Works perfectly. Essentially it's just a small fan with a hose that blows air from the fridge into the tower. Tower is almost sweating it's so cold. Now my pours average less than 1/4" of foam on top - first pour and every pour after.