- Comes with a Kegco Exclusive 14" tall dual-tap draft tower, two faucets with faucet knobs, and two 5 foot lengths of 3/16" I.D. clear beer tubing
- Large interior holds up to three Cornelius home-brew kegs and can also be used as a fermentation chamber or an all-refrigerator
- Can be converted into an all-refrigerator using the 2 included adjustable shelves for additional refrigerated storage
- Fan-forced cooling and digital temperature display with intuitive controls provide one of the largest temperature ranges on the market
- Features easy-rolling locking casters, a chrome guard rail, and a dishwasher-safe removable built-in drip tray for easy clean-up
Dimensions: 33.25" H x 24" W x 25" D
Featuring a sleek black cabinet and stainless steel door, Kegco's HBK309S-2NK adds digital functionality and a wider available temperature range to one of the best kegerators you can find. Your favorite features from our other high-quality Kegco Draft Beer Dispensers are still included, such as attractive styling, a removable and easy to clean built-in drip tray, a chrome guard rail to prevent your glasses from sliding off the top, and easy rolling casters that allow you to move the unit from room to room with ease. Now, in addition to having a wider available temperature range for more precise temperature control, you also have the ability to view your specific temperature setting and easily set it with the push of a button.
Digital Temperature Control
A digital temperature display with push button controls makes it easy to set and verify the internal temperature of this homebrew beer cooler. Instead of having to guess what temperature the number on a manual dial will produce, these digital controls allow you simply press an up or down button to adjust the temperature by 1 degree. The LED display can be set to either Fahrenheit or Celsius.
Wide Enough Temperature Range to Dispense or Ferment
Thanks to fan-forced cooling, Kegco HBK309 home brew dispensers feature even and consistent cooling and one of the coldest temperature ranges of any keg dispenser on the market today. The temperature can be set as low as 32 degrees to dispense ice cold homebrew, or set high enough to act as a fermentation chamber for your fermenting brew.
Large Interior
This keg beer refrigerator has a spacious interior that is large enough to hold up to three ball lock home-brew kegs. This allows you to dispense from two kegs while keeping a third cool for later. If you'll be using this kegerator to ferment your home-brew, it will easily accommodate a 6 gallon bucket or carboy.
Deep Chill Function
The HBK309S-2NK has a Deep Chill function that forces the compressor to work continuously for 24 hours to quickly cool down a warm beer keg. Simply press the Deep Chill button to activate this function, and press it again once your keg has reached the desired temperature to return the unit to its regulator operation
Converts to a Refrigerator with 2 Shelves
When you're not using this kegerator to dispense delicious home-brewed beer, it can be easily converted into an all-refrigerator for extra food and beverage storage. The two included adjustable shelves can be placed far enough apart to hold gallon jugs or 2-liter bottles, and the wide temperature range makes this unit suitable for storing bottles of wine.
Locking Casters Provide Mobility
Easy-roll casters make it easy to move the HBK309S-2NK from the kitchen to the patio for your next backyard barbecue! Once the kegerator is where you want it, the casters can be locked to prevent it from moving again until you want it to.
Kegco's Double Faucet Home-Brew Kegerator comes with a Kegco Exclusive 14" tall dual tap draft tower, two faucets with faucet knobs, and two 5 foot lengths of 3/16" I.D. clear beer tubing. Choose from the optional add-ons below to customize a homebrew dispense system setup that's just right for you.
* - Letting the Deep Chill function run for the full 24 hours may result in freezing of the keg.
- Holds up to three home brew beer kegs
- Matte black cabinet with stainless steel door
- Digital temperature control keeps temperature in range of 32°F-75°F
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Can be set high enough for use as a fermentation chamber
- Deep chill function quickly cools down warm kegs
- Includes easy roll casters for mobility
- Removable built-in drip tray with grill collects drips and spills, and can be easily cleaned in the dishwasher
- Chrome guard rail helps prevent your mugs and glasses from sliding off
- Stainless steel interior floor mat ensures long lasting durability and allows kegs to easily glide in and out
- 25% more energy efficient design saves you money every month!
- Plugs into a standard home outlet
Warranty Information:
- 1 Year Parts and Labor
- 5 Years on Compressor (parts only)
Brand | Full Size | Pony Size | Quarter slim | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|---|---|---|
Kegco K199 |
1 | 1 | 1 | 2 | 2 | 2 | 2 |
Kegco K209 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco K309 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco VSK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco SLK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco Z163 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Kegco HK38 |
1 | 1 | 2 | 3 | 3 | 3 | 3 |
Kegco XCK-1 |
1 | 1 | 2 | 4 | 4 | 4 | 4 |
Summit SBC677 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Summit SBC635 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Haier Kegerator |
1 | 1 | 2* | 2 | 3 | 3 | 3 |
Danby Kegerator |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
All Marvel Kegerators |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Perlick HP15T |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Perlick HP24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
Perlick HC24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
UBC Kegmaster |
1 | 1 | 2 | 4** | 3 | 4** | 4** |
Beverage Air BM23 |
1 | 1 | 2 | 3 | 4 | 4 | 4 |
Everest EBD1 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Brand | Full Size | Pony Size | Quarter slim |
---|---|---|---|
Kegco K199 |
1 | 1 | 1 |
Kegco K209 |
1 | 1 | 1 |
Kegco K309 |
1 | 1 | 1 |
Kegco VSK-15 |
0 | 0 | 0 |
Kegco SLK-15 |
0 | 0 | 0 |
Kegco Z163 |
1 | 1 | 1 |
Kegco HK38 |
1 | 1 | 2 |
Kegco XCK-1 |
1 | 1 | 2 |
Summit SBC677 |
1 | 1 | 1 |
Summit SBC635 |
1 | 1 | 1 |
Haier Kegerator |
1 | 1 | 2* |
Danby Kegerator |
1 | 1 | 1 |
All Marvel Kegerators |
1 | 1 | 1 |
Perlick HP15T |
0 | 0 | 0 |
Perlick HP24T |
0 | 1 | 0 |
Perlick HC24T |
0 | 1 | 0 |
UBC Kegmaster |
1 | 1 | 2 |
Beverage Air BM23 |
1 | 1 | 2 |
Everest EBD1 |
1 | 1 | 1 |
Brand | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|
Kegco K199 |
2 | 2 | 2 | 2 |
Kegco K209 |
2 | 3 | 3 | 3 |
Kegco K309 |
2 | 3 | 3 | 3 |
Kegco VSK-15 |
1 | 1 | 1 | 1 |
Kegco SLK-15 |
1 | 1 | 1 | 1 |
Kegco Z163 |
2 | 3 | 2 | 3 |
Kegco HK38 |
3 | 3 | 3 | 3 |
Kegco XCK-1 |
4 | 4 | 4 | 4 |
Summit SBC677 |
2 | 3 | 2 | 3 |
Summit SBC635 |
2 | 3 | 3 | 3 |
Haier Kegerator |
2 | 3 | 3 | 3 |
Danby Kegerator |
2 | 3 | 2 | 3 |
All Marvel Kegerators |
2 | 3 | 3 | 3 |
Perlick HP15T |
1 | 1 | 1 | 1 |
Perlick HP24T |
2 | 2 | 1 | 2 |
Perlick HC24T |
2 | 2 | 1 | 2 |
UBC Kegmaster |
4** | 3 | 4** | 4** |
Beverage Air BM23 |
3 | 4 | 4 | 4 |
Everest EBD1 |
2 | 3 | 3 | 3 |
* - Using Wood riser for front keg
** - With external CO2 tank (3 with internal CO2 tank)
Dimensions | |
---|---|
Height | 33.25" |
Width | 24" |
Depth | 25" |
Weight | |
---|---|
Unit Weight | 96.8 lbs |
Shipping Weight | 110 lbs |
Warranty | |
---|---|
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Key Features | |
---|---|
Built-in Capable | No |
Keg Coupler | Optional Add-On |
Security Lock | No |
Regulator | Optional Add-On |
CO2 Tank | Optional Add-On |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Keg Storage Capacities | |
---|---|
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 3 |
5 gal. Ball/Pin Lock Keg | Holds 3 |
Exterior | |
---|---|
Cabinet | Black |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Draft Beer Tower | |
---|---|
Number of Faucets | 2 |
Material | Chrome |
Height | 14.5" |
Diameter | 3" |
Door | |
---|---|
Color / Material | Stainless Steel |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Cooling System | |
---|---|
Type | Compressor |
Defrost System | Manual |
Front Ventilation | No |
Controls | |
---|---|
Adjustable Thermostat | Yes |
Digital | Yes |
Electrical | |
---|---|
Electrical Requirements | 115 V / 60 HZ |
Running Amps | 1.7A |
Labor - 12 Months
LIMITED ONE YEAR WARRANTYFor one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
Parts - 60 Months
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
Additional Details
WHAT IS NOT COVERED:- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
10/25/2013
Fantastic Product! Amazing Company! DanThe kegerator is by far better than any I have owned. It's a solid build and the components supplied by Beverage Factory are top of the line. For example, when I brought the CO2 tank in to be filled, they commented on how great of a tank it was and how others who had purchased kegerators from other retailers have brought in tanks made in China with leaks and expired tank inspection stamps. The unit was a breeze to assemble and could be done by nearly anyone.
I had a slight issue with my CO2 regulator and called about it. A new regulator was sent out immediately, no questions asked. AMAZING customer service!
09/29/2013
Great Value! Highly Recommended Amy & Clyde- Used in home bar
- Unit: (Pros)
- Overall: This unit is a great value. It's intended as a refrigerator type system, and it delivers on its purpose. It looks great, well designed, great fit and finish and stays at a constant temperature.
- Components: The additional components are of great quality. The lines, tower, couplers, regulator and CO2 tank are all top notch. We like the CO2 tank so much that we requested it be filled instead of replaced at our local welding facility.
- Assembly: We had this unit up and running in about 30 minutes after we filled the CO2 tank and bought the beer. The instructions were very easy to follow.
- Controls: The digital controls on the front of the unit are easily managed and readable. We are very glad that we decided on this feature.
- Performance: This thing consistently pours flawlessly. Once we dialed in the correct pressure with the chosen upgraded regulator (very nice!), we have been very pleased with the pints that we pour.
- Unit: (Cons)
- Drip Tray: The accompanied drip tray is a two-piece plastic unit that functions fine. We would love to have the option for a metal drip tray to be as nice as the rest of the unit.
- CO2 Tank Holder: The clip for the CO2 tank is a "Horseshoe" shaped metal band with small holes on each flared end. This design would be fine if there was a provided way to hold the flared ends somewhat together. My wife and I are using a simple nylon cord with a locking slide. (Think camping chair bag closure)
- Beverage Factory: (Pros)
- Overall: This has been one of the best buying experiences that my wife and I have ever had online or over the phone. Our representative was very knowledgeable. The majorly impressive thing was that when she was stumped by one of our questions, she took the initiative and called us back with an answer that day! From start to finish, Beverage Factory listened to our wants and needs, educated us on the best products and components and has followed up after the sale to make sure everything went smoothly.
- Beverage Factory: (Cons)
- Overall: None to report - this was an awesome experience!!!!
- Recommendation: If you are looking for a double tap unit that works for your home bar, kitchen, man cave or game room, the Kegco K309B-2 ROCKS!!!!! We would recommend upgrading the regulator to the pro unit and the tower/faucets to stainless steel. You will be happy that you did. All-in-all, we are very pleased and will be doing more business with Beverage Factory in the near future.
09/27/2013
BIG! COLD! BradThis was a big purchase for me. Once I knew I was actually buying a fridge (as opposed to converting one) I decided to go ahead and get one that could fit multiple kegs with two faucets. Might as well right! Currently I have a slim quarter and a sixth installed with a little room to spare. I think I could fit 2 slim quarters as the inside of the door is recessed a little. From the outside it is about the size of a dishwasher.
It will take a few days to cool down completely, but then the ambient tempature inside will match the display. I keep it on 33°F with no problems. You can use deep chill for the first few hours when you first put a keg in. Also, you will be fiddling with the regulator some and opening the door alot makes it harder to get cool.
I installed this unit under my workbench in the garage and mounted the tower to my workbench surface. I used a 6" piece of 2" PVC as a spacer and used and upside down shower drain as a flange to attach to the fridge. Multiple lengths of screws are included. I also had just enough room to put foam insulation down inside the PVC around the beer lines. The tower includes nice rubber insulation as well.
Finally, I find it much easier to pour into a pitcher as opposed to straight into a pint glass. There will be a little foam as the beer in the lines in the tower will warm up just a little. It's not enough to tell a temperature difference, just enough to make some foam. I find it's best to "burp" the faucet twice (open/close quickly), then let it run into the pitcher. From there you can make a perfect pour into your frosty pint glass.
Here are my recommended upgrades:
Worm gear hose clamps on CO2 lines (auto parts store)
Dual gauge regulator with dual shutoff valves
Standard 'D' system sankey couplers
Stainless steel tower
Perlick 525SS faucets
Pressurized cleaning kit
Stainless steel drip tray
08/19/2013
Love this Kegerator C. JohnsonI recently purchased this kegerator, I am thrilled with it! Easy to set up and pouring cold beer. I like my beer REALLY cold, this unit has an additional fan and digital display for accurate temperature. I am glad I was able to purchase a great unit with out having to spend a ton of money. I upgraded the regulator to a double gauge, I am not that close to an air and gas place, I would hate to run out.
This is an indication that your units compressor is getting too cold then warning up creating the full tray. I would suggest you empty out the tray and try to determinant how often the tray is filling up. Are there extreme weather issues happening lately in your area that could be effecting the unit? If you would like to give us a call and chat with our technical department or customer service we're available from 7-4 PST Monday-Friday.
Yes you can use it to dispense cider, i would look into seeing what PSI pressure Cider is dispensed at before doing so. I hope this helped and thank you for your question.
Thank you,
11/01/2013
wow this is a dream come true!Pros: everything!
Coins: nothing!
This product out of the box is amazing. Easy setup as well as great construction. The way it is designed the first poor is always cold due to the internal fan. With this product, you get what you pay for! Temp control is great and the chill function are flawless!