- Comes complete with a Kegco Exclusive 14" tall triple-tap draft tower, three faucets with faucet knobs, and three 5 foot lengths of 3/16" I.D. clear beer tubing
- Large interior stores and dispenses 3 home brew kegs, and can also be used as a fermentation chamber or all-refrigerator
- Can be converted into an all-refrigerator using the 2 included adjustable shelves for additional refrigerated storage
- Easily set and verify the internal temperature thanks to a digital temperature display with user-friendly push-button controls
- Temperature can be set between 32°F and 75°F, one of the widest available temperature ranges of any kegerator on the market
Dimensions: 33.25" H x 24" W x 25" D
Kegco's stylish new HBK309S-3NK Homebrew Kegerator adds digital functionality and a wider available temperature range to one of the best kegerators you can find. Your favorite features from our other high-quality Kegco Draft Beer Dispensers are still included, such as attractive styling, a removable and easy to clean built-in drip tray, a chrome guard rail to prevent your glasses from sliding off the top, and easy rolling casters that allow you to move the unit from room to room with ease. Now, in addition to having a wider available temperature range for more precise temperature control, you also have the ability to view your specific temperature setting and easily set it with the push of a button.
Digital Temperature Control
The HBK309S-3NK's intuitive digital functionality allows you to easily set and adjust the internal temperature by a single degree, view the temperature in Fahrenheit or Celsius on a clear LED display, or activate the Deep Chill function to cool down a warm beer keg - all with the push of a button!
Wide Enough Temperature Range to Dispense or Ferment
Fan-Forced cooling gives this kegerator one of the coldest temperature ranges of any beer cooler on the market today, and can be set as low as 32 degrees to dispense ice cold draft beer. The fan helps to provide even cooling throughout the cabinet.
Large Interior
Store and dispense up to three ball lock Pepsi kegs in the HBK309S-3NK's spacious interior, which can also be used to hold a 6-gallon bucket or carboy during fermentation. You can even use this versatile unit as an all-refrigerator to store food and other beverages!
Deep Chill Function
These keg coolers feature a Deep Chill function that greatly reduces the amount of time you have to wait for a warm beer keg to reach serving temperature. Simply press the Deep Chill button, and the compressor begins working continuously for up to 24 hours to cool your keg to the desired temperature. Press the button a second time, and the unit is returned to its normal operation.*
Converts to a Refrigerator with 2 Shelves
When you aren't using it to dispense delicious home-brew, this kegerator can be easily converted into an all-refrigerator to provide additional refrigerated storage space for parties and special events. Each unit includes two adjustable shelves that can be spaced far enough apart to hold gallon jugs or 2-liter bottles, and the wide available temperature range makes it suitable for storing bottles of wine
Locking Casters Provide Mobility
The HBK309S-3NK comes with easy-rolling casters that make it possible to enjoy your home-brewed beer in nearly any room of your home! Once the keg dispenser is in position, the casters can be locked to ensure that it does not move again until you want it to.
This Kegco Homebrew Beer Kegerator comes with a Kegco Exclusive 14" tall triple tap draft tower, three faucets with faucet knobs, and three 5 foot lengths of 3/16" I.D. clear beer tubing. Choose from the optional add-ons below to customize a homebrew dispense system setup that's just right for you.
* - Letting the Deep Chill function run for the full 24 hours may result in freezing of the keg.
- Holds up to three home brew beer kegs
- Matte black cabinet with stainless steel door
- Digital temperature control keeps temperature in range of 32°F-75°F
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Can be set high enough for use as a fermentation chamber
- Deep chill function quickly cools down warm kegs
- Includes easy roll casters for mobility
- Removable built-in drip tray with grill collects drips and spills, and can be easily cleaned in the dishwasher
- Chrome guard rail helps prevent your mugs and glasses from sliding off
- Stainless steel interior floor mat ensures long lasting durability and allows kegs to easily glide in and out
- 25% more energy efficient design saves you money every month!
- Plugs into a standard home outlet
Warranty Information:
- 1 Year Parts and Labor
- 5 Years on Compressor (parts only)
Brand | Full Size | Pony Size | Quarter slim | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|---|---|---|
Kegco K199 |
1 | 1 | 1 | 2 | 2 | 2 | 2 |
Kegco K209 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco K309 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Kegco VSK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco SLK-15 |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Kegco Z163 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Kegco HK38 |
1 | 1 | 2 | 3 | 3 | 3 | 3 |
Kegco XCK-1 |
1 | 1 | 2 | 4 | 4 | 4 | 4 |
Summit SBC677 |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
Summit SBC635 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Haier Kegerator |
1 | 1 | 2* | 2 | 3 | 3 | 3 |
Danby Kegerator |
1 | 1 | 1 | 2 | 3 | 2 | 3 |
All Marvel Kegerators |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Perlick HP15T |
0 | 0 | 0 | 1 | 1 | 1 | 1 |
Perlick HP24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
Perlick HC24T |
0 | 1 | 0 | 2 | 2 | 1 | 2 |
UBC Kegmaster |
1 | 1 | 2 | 4** | 3 | 4** | 4** |
Beverage Air BM23 |
1 | 1 | 2 | 3 | 4 | 4 | 4 |
Everest EBD1 |
1 | 1 | 1 | 2 | 3 | 3 | 3 |
Brand | Full Size | Pony Size | Quarter slim |
---|---|---|---|
Kegco K199 |
1 | 1 | 1 |
Kegco K209 |
1 | 1 | 1 |
Kegco K309 |
1 | 1 | 1 |
Kegco VSK-15 |
0 | 0 | 0 |
Kegco SLK-15 |
0 | 0 | 0 |
Kegco Z163 |
1 | 1 | 1 |
Kegco HK38 |
1 | 1 | 2 |
Kegco XCK-1 |
1 | 1 | 2 |
Summit SBC677 |
1 | 1 | 1 |
Summit SBC635 |
1 | 1 | 1 |
Haier Kegerator |
1 | 1 | 2* |
Danby Kegerator |
1 | 1 | 1 |
All Marvel Kegerators |
1 | 1 | 1 |
Perlick HP15T |
0 | 0 | 0 |
Perlick HP24T |
0 | 1 | 0 |
Perlick HC24T |
0 | 1 | 0 |
UBC Kegmaster |
1 | 1 | 2 |
Beverage Air BM23 |
1 | 1 | 2 |
Everest EBD1 |
1 | 1 | 1 |
Brand | 5 Gallon D System | 5 Gallon Ball Lock | 5 Gallon Pin Lock | 5 Gallon Strap Handle |
---|---|---|---|---|
Kegco K199 |
2 | 2 | 2 | 2 |
Kegco K209 |
2 | 3 | 3 | 3 |
Kegco K309 |
2 | 3 | 3 | 3 |
Kegco VSK-15 |
1 | 1 | 1 | 1 |
Kegco SLK-15 |
1 | 1 | 1 | 1 |
Kegco Z163 |
2 | 3 | 2 | 3 |
Kegco HK38 |
3 | 3 | 3 | 3 |
Kegco XCK-1 |
4 | 4 | 4 | 4 |
Summit SBC677 |
2 | 3 | 2 | 3 |
Summit SBC635 |
2 | 3 | 3 | 3 |
Haier Kegerator |
2 | 3 | 3 | 3 |
Danby Kegerator |
2 | 3 | 2 | 3 |
All Marvel Kegerators |
2 | 3 | 3 | 3 |
Perlick HP15T |
1 | 1 | 1 | 1 |
Perlick HP24T |
2 | 2 | 1 | 2 |
Perlick HC24T |
2 | 2 | 1 | 2 |
UBC Kegmaster |
4** | 3 | 4** | 4** |
Beverage Air BM23 |
3 | 4 | 4 | 4 |
Everest EBD1 |
2 | 3 | 3 | 3 |
* - Using Wood riser for front keg
** - With external CO2 tank (3 with internal CO2 tank)
Dimensions | |
---|---|
Height | 33.25" |
Width | 24" |
Depth | 25" |
Weight | |
---|---|
Unit Weight | 97 lbs |
Shipping Weight | 110 lbs |
Warranty | |
---|---|
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Key Features | |
---|---|
Built-in Capable | No |
Keg Coupler | Optional Add-On |
Security Lock | No |
Regulator | Optional Add-On |
CO2 Tank | Optional Add-On |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Keg Storage Capacities | |
---|---|
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 3 |
5 gal. Ball/Pin Lock Keg | Holds 3 |
Exterior | |
---|---|
Cabinet | Black |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Draft Beer Tower | |
---|---|
Number of Faucets | 3 |
Material | Chrome |
Height | 14.5" |
Diameter | 3" |
Door | |
---|---|
Color / Material | Stainless Steel |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Cooling System | |
---|---|
Type | Compressor |
Defrost System | Manual |
Front Ventilation | No |
Controls | |
---|---|
Adjustable Thermostat | Yes |
Digital | Yes |
Electrical | |
---|---|
Electrical Requirements | 115V / 60 Hz |
Running Amps | 1.7A |
Labor - 12 Months
LIMITED ONE YEAR WARRANTYFor one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
Parts - 60 Months
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
Additional Details
WHAT IS NOT COVERED:- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
09/13/2017
I liked it so much, I bought 2 more Pumpkin KingYou probably can't beat this kegerator for home use. I bought one 3 years ago, then another 2 years ago, and just got one this year. No problems with them at all. I like having the digital temperature gauge. No guessing what you have the kegerator set at. Multiple options for serving is awesome. I've put full size kegs in them, and sometimes run 2 sixth barrels in each.
09/04/2017
Adds another level of fun to brewing! Dawg PawsThis is a great entry unit into home brewing keg dispensing! Works fantastic. Family, friends, and neighbors are all amazed with being able to get beer dispensed from a keg at my house instead of being handed a bottle of beer. Another benefit will be able to control my fermentation temperatures, and being able to now do lager beers. I also can't overstate how well packaged everything came. Looking forward to many years of use.
08/01/2017
Good product. Works as advertised EdI will start that I simply don't like to give 5 star reviews, but this kegerator comes as close to deserving one as anything I have ever purchased.
I have the K309B-2 Dual Tap unit. I have the upgraded stainless tower and commercial pro dual gauge regulator while the rest of the components are stock.
PROS:
Very easy to set up and assemble. I had mine up and running within minutes (after unpacking and inspecting that is).
Temperature control is stable and truly is "set it and forget it.". Mine is set up in the garage where temps vary from high 50's at night to low 90's during the day, and I have no temp variation issues.
Fairly quiet operation, but I may not want it in my bedroom.
Sturdy build (mostly. More on that later).
Lots of room inside. This EASILY fits the 5lb CO2 bottle, large dual gauge regulator, Two 1/6 barrel kegs, and the associated lines with room to spare.
CONS:
While this is arguably the best kegerator out there for the money, and I would argue in favor of that point, in order to really make this unit shine you need to spend a little more. A number of reviews I read during my research phase complained about the stock/included faucets sticking, and mine were no different. Within the first day of use one of mine stuck, though I eventually worked it free, and after the first keg went through that side it is now jammed and nonfunctional. Just assume, or even do it when you purchase it, that you will end up upgrading the faucets sooner than later. I will be ordering Perlicks very soon.
The unit itself is fairly sturdy and well constructed. There is some "wobble/flexing" of the tower and it would have been nice to have a little more solid foundation to mount the tower to, but it does sit securely and while not truly a CON, it is worth noting so that you won't be surprised.
I had a couple of small issues on the CO2 side, one with the connection between the tank valve and the regulator, which was blowing by at a very fast rate. This was solved by simply removing the regulator and rotating the bushing and re-installing. Also, the regulator feels "crunchy" when turning the handle and experience tells me that this isn't a good thing for regulators to feel like, but I am not sure if this is an actual issue or not. After the initial setting/adjusting of the pressure I did have a situation where the next morning my pressure had creeped back to 0-1psi and I had to increase it again. That said it has been holding right at 9-10psi like champ since then.
Overall I would highly recommend this to anyone out there looking for a home kegerator in spite of some of the smaller things I pointed out. I did quite a bit of research and turned up a number of issues and complaints about foaming, needing to add additional insulation, tower cooling, etc. None of that was a problem for me and it was literally about as plug and play as you can get. Beer pours VERY COLD (I keep mine at 36F) and little or no waste from running foam from the lines before you can make a good pour. Well worth the money.
06/15/2017
Service has made me a customer for LIFE! Brother JamesTL;DR: The Perlick 650SS flow control faucets will fit on the homebrew package upgraded SS tower, and the BevFactory's customer service is out of this world.
So, I'm only in my first week of having the kegerator set up, but everything seems to be working fine.
But it's the Beverage Factory Customer Service I want to tell you about. Their sales folks were extremely knowledgeable and helpful when I ordered the unit, and all the upgrades I added to it / changed on it. But they got one thing wrong, and told me the Perlick 650SS flow control faucets wouldn't work on the homebrew package's upgraded triple SS tower. So I got 630SS faucets.
When I was assembling it, I could see that the 650SS faucets would fit just fine with this tower, so I called them and they were super-cool about it. They apologized several times (I wasn't asking for an apology, nor was I upset, but it they were extremely curteous and helpful, and even offered an apology from my original sales rep).
Their tech support person said she'd go and assemble a triple tower with the 650SS faucets and would call me back. In 20 minutes she called me back and told me they do work, and went to great lengths to remedy my situation. I'm not going to get into specifics, but they were very generous in helping facilitate the exchange.
I will be recommending Beverage Factory to anyone wanting to buy a kegerator or other beer equipment, and I'll be checking with them before I shop anywhere else.
This is an indication that your units compressor is getting too cold then warning up creating the full tray. I would suggest you empty out the tray and try to determinant how often the tray is filling up. Are there extreme weather issues happening lately in your area that could be effecting the unit? If you would like to give us a call and chat with our technical department or customer service we're available from 7-4 PST Monday-Friday.
Yes you can use it to dispense cider, i would look into seeing what PSI pressure Cider is dispensed at before doing so. I hope this helped and thank you for your question.
Thank you,
10/21/2017
Great unit, Great serviceJust unpacked and set it up. Looks Great! All parts fit perfectly and seem to be very good quality. Runs Quietly. First keg is cooling down right now. Customer service was superb and one phone call answered all my questions/concerns and even completed the order process for me without going back to the on-line order system. Shipped out promptly but it took a while in transit due to the distance. Packaging was well done and everything arrived in perfect condition. Highly recommend this to anyone. One of the best purchases I've made on line.