Kegco Deluxe Door Mount DIY Kegerator Keg Tap Conversion Kit

With this Deluxe Kegerator Conversion Kit, Kegco provides everything you'll need to quickly convert your refrigerator into a beer dispenser and begin dispensing delicious cold draft beer! From the durable commercial grade double gauge regulator to the NSF approved commercial-grade American D System keg coupler, every part is high quality and built to last, so you can dispense your own beer for years to come. We've even included a stainless steel drip tray that contains any drips, so cleaning up after every use is just as easy as the initial assembly! Detailed instructions are included in every kit, but if you should come across any questions, our helpful product specialists are available at 1-800-710-9939 for additional support.

Commercial Grade Double Gauge Regulator:
Durably constructed to deliver a consistent flow pour after pour, this commercial grade dual gauge regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body.

Lever Handle D System Keg Coupler:
This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

Door Mount Stainless Steel Drip Tray:
Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually. You can upgrade to a drip tray with drain for $4.

Note: CO2 tank is optional add on and shown for reference purposes

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• (Optional) Aluminum 5 lb Co2 Tank
  We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.


• YH-762 - COMMERCIAL GRADE DOUBLE GAUGE CO2 REGULATOR
  Durably constructed to deliver a consistent flow pour after pour, this commercial grade dual gauge regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body.


• 516BAL-5 - 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE
  Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.


• WORM-SM - WORM DRIVE CLAMPS FOR 3/16" OR 5/16" I.D. TUBING
  This durable stainless steel worm drive clamp is easy to install or remove using a flat head screwdriver, affording you a superior grip on your hoses. It fits 3/16" to 5/16" I.D. (up to 9/16" O.D.) vinyl hose or 1/4" to 5/16" I.D. (up to 7/16" O.D.) poly hose. Its sturdy stainless steel construction makes it reusable and resistant to corrosion over time.


• KT85D-L - D SYSTEM KEG TAP - BLACK LEVER HANDLE
  This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.


• BLA316-5 - 5 FEET OF CLEAR BEER LINE WITH HEXNUT ASSEMBLY
  This clear 3/16" thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out. Included is 1 Plastic Snap Clamp with a reusable design and a coupling assembly of 1 Stepless Clamp, 1 3/16" Hose Nipple/Tail Piece, and Hex Coupling Nut that connects to keg coupler.


• SHANK4 - 4-1/8" LONG SHANK WITH NIPPLE ASSEMBLY - 3/16" I.D. BORE
  Our 4-1/8" long forged brass beer shank features a black flange on the front and a compression ring on the back, making it easy to secure the shank to a mounting surface to attach beer line to your faucet. The shank comes fitted with a tail piece for connecting to 3/16" I.D. beer line.


• FKNB - BLACK PLASTIC BEER FAUCET KNOB
  Looking for a stylish and reliable tap handle that won't break the bank? This durable ABS plastic faucet knob has a sleek and glossy black finish that gives any draft beer setup an elegant look at an affordable price. The 2-5/8" tall knob has 3/8" -16 UNC lever threads and fits all US beer faucets.


• CFBL - CHROME BEER FAUCET WITH BRASS LEVER
  Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.


• DP-64 - STAINLESS STEEL WALL MOUNT DRIP TRAY - NO DRAIN
  Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually.


• FWHD - HEAVY DUTY FAUCET WRENCH
  Make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them.

SPECIAL INSTRUCTIONS:

• When converting a compact refrigerator it is very important to know your internal dimensions of your refrigerator with the door shut to insure that this beer cooler conversion kit will work on your compact refrigerator or chest freezer. To fit a full size keg in a refrigerator, you will need a minimum of 28" Interior Height and 17" width and depth. For a pony keg you will need 18" Interior Height and 17" width and depth. Remember to measure the depth with the door closed. When measuring the Interior Height, be sure to measure from the top of the compressor step bottom shelf. All refrigerators have a compressor step that needs to be accounted for when measuring your interior height.
• Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. It is a good idea to find out what options are available in your area so that you don't buy one of our brand new high quality aluminum CO2 tanks, only to have it swapped out for a rusty old steel tank. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
• All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.