Kegco Standard Two Keg Tower DIY Kegerator Conversion Kit

Dispense up to two kegs of delicious cold draft beer from your very own kegerator with Kegco's Standard Dual Keg Kegerator Conversion Kit! This kit comes with all of the high quality commercial-grade parts you'll need to successfully convert your refrigerator or freezer into a two product beer dispenser, including a pro series double gauge regulator for safe and easy CO₂ management and a durable lever handle American D system Sankey coupler with an easy-to-use design. Putting the finishing touches on your new kegerator is a sleek 3" diameter double faucet chrome plated draft tower with two matching chrome plated faucets, which gives your kegerator a stylish look that is sure to impress your friends! This kit was designed to dispense 2 full size kegs, 2 pony kegs, 2 six gallon kegs, or any combination your choose, depending on your refrigerator's capacity.

3" Diameter, Two Faucet Chrome Plated Draft Beer Tower:
Found on many commercial grade kegerators, this 3" diameter air-cooled draft beer tower is sure to look great on your own kegerator. It comes complete with two NSF Approved chrome plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5' lengths of 3/16" I.D. beer line extend from the bottom of the tower.

Two Lever Handle D System Keg Couplers:
This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

Pro Series Double Gauge Regulator:
If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.

Note: CO2 tank is optional add on and shown for reference purposes

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• (Optional) Aluminum 5 lb Co2 Tank
  We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.


• LH-542-2 - PRO SERIES DOUBLE GAUGE TWO PRODUCT CO2 REGULATOR
  If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.


• 516BAL-5 - TWO 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINES
  Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.


• 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16 INCH ID TUBING
  This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time.


• KT85D-L - TWO D SYSTEM KEG TAPS - BLACK LEVER HANDLES
  This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.


• D4743DT - CHROME PLATED METAL DUAL FAUCET DRAFT BEER TOWER - 3" COLUMN
  Found on many commercial grade kegerators, this 3" diameter air-cooled draft beer tower is sure to look great on your own kegerator. It comes complete with two NSF Approved chrome plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5' lengths of 3/16" I.D. beer line extend from the bottom of the tower. The thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.


• FWSTD - STANDARD METAL BEER FAUCET WRENCH
  This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.

SPECIAL INSTRUCTIONS:

• When converting a compact refrigerator it is very important to know your internal dimensions of your refrigerator with the door shut to insure that this beer cooler conversion kit will work on your compact refrigerator or chest freezer. To fit a full size keg in a refrigerator, you will need a minimum of 28" Interior Height and 17" width and depth. For a pony keg you will need 18" Interior Height and 17" width and depth. Remember to measure the depth with the door closed. When measuring the Interior Height, be sure to measure from the top of the compressor step bottom shelf. All refrigerators have a compressor step that needs to be accounted for when measuring your interior height.
• Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. It is a good idea to find out what options are available in your area so that you don't buy one of our brand new high quality aluminum CO2 tanks, only to have it swapped out for a rusty old steel tank. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
• All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
UPC: 608938443397