Taprite Four Product Secondary Co2 Regulator

Model: T1694ST

6 Reviews

$425.00SAVE 25% - $106.25

$318.75

IN STOCK (usually ships within 24 hours)

Secondary regulators allow you to regulate the pressure of multiple kegs individually
Each regulator has a built-in high volume external safety relief valve to protect dispensing systems
Forged brass body provides greater durability and has enough mass to act as a heat sink to prevent freeze up
Outlet fittings feature 1600 ball type shut-off and fit 5/16" I.D. pressure hose; high pressure side is right hand thread
All regulators are pressure tested for leaks and defects prior to delivery

DESCRIPTION

REVIEWS

Q&A

This Taprite T1694ST Four Product Secondary Co2 Regulator can be used when you are attempting to dispense two or more kegs off of the same Co2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually.

High pressure side is right hand thread
To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.
Body parts are 1/4" NPT (F).
Outlet fittings feature Taprite 1600 ball type shut-off. Fits 5/16" I.D. pressure hose. Inlet designed for 5/16" I.D. pressure tubing.
All models have heavy duty stainless steel wall mounting brackets.
Maximum delivery pressure: 50 PSIG
Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG
Front loading seat assembly is easily replaceable in the field.
All regulators are pressure tested for leaks and defects prior to delivery to assure in-field reliability.
Available in multiple pressure and product models.

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

07/07/2015

Great Regulators

Chad

These regulators were a little more expensive than other brands but they feel solid and work great!

03/02/2015

Excellent Secondary Regulator

This secondary regulator works great on our 4 tap kegerator. It is built heavy and is easy to use to regulate pressure to each of our 4 kegs. The only catch to this regulator - there is a nipple fitting on each end of the regulator and you must plug the end that is not in use or hooked to your primary regulator. The on/off valves below the regulator work well for switching kegs.

02/02/2015

check valves model also thru

patrick

There are two choices - the version with check valves has a barb on either end, with no shut off. I put a one foot length of hose that was tied off to keep my gas from escaping. I didn't want a "thru" version, but the check valves seduced me.

Take care to order the right product. I am very irritated.

01/19/2015

Product works as described.

E McKishen

Mounted this on the outside of my kegerator. I have 6 kegs to regulate. I use the tank pressure to feed my highest carb level which is a root beer at 30psi. Then I usually have 2 kegs around the same pressure which share a regulator. I might add a fifth regulator so I don't have to share 1. These are very easy to add more onto. I took it out of the box and installed it with no leaks.

08/12/2014

quality, best price, prompt delivery

Tom

These regulators were the best quality and the least expensive I found online. We received them quicker than expected. Will order from Beverage Factory again in the future.

Showing Reviews 1-6 of 6

Be the first to ask a question.

CONNECT WITH US!

@BeverageFactory

Taprite Four Product Secondary Co2 Regulator

CONNECT WITH US!

Added to Cart