Tower Conduit

Tower Conduit Installation Instructions

1. Mark the Installation Location.
   Position the kegerator beneath the countertop and align it with the tower opening on the unit.
2. Drill a 2.5" Diameter Hole.
   Drill a 2.5" (63.5 mm) hole through the countertop directly above the kegerator opening. Be careful not to damage the kegerator.
3. Install the Bottom Flange.
   From inside the kegerator, position the bottom flange over the opening and screw it securely into place.
4. Insert the Threaded Conduit.
   Insert the threaded conduit through the countertop opening and into the kegerator opening.
5. Install the Top Flange.
   Screw the top flange onto the threaded conduit from above the countertop.
6. Confirm the Conduit Position.
   Ensure the conduit is properly aligned and flush with the bottom flange inside the kegerator.
7. Align and Secure the Draft Tower.
   Position the draft tower over the top flange and fasten it securely. Trim any excess conduit if necessary.
8. Feed the Beverage Lines Through the Conduit.
   Route the beer or beverage lines through the conduit and into the kegerator, ensuring they are properly positioned for connection.