Low Profile Standard Tower DIY Kegerator Conversion Kit Reviews

10/28/2013

This is a great system. The quality is spot-on. I've worked in a laboratory for over a decade and the regulator provided here is similar quality, so I'm not worried about that breaking. The tubing is quality, the regulator works as it should. 10/10 would buy again. That said, some requests for this system include:
1. provide hose clamps instead of the plastic clips. I immediately tossed them out and bought hose clamps. 49 cents each and they're ss. I feel much better about using these.
2. Make an easier connection for the tubing to the draft. I'll be disassembling everything to clean, as I don't often have a keg set up to my system, and I want to take everything apart.
3. The tubing connection from the tower had a nice SS female threaded connection, which I had to cut off and throw away so I could attach the tubing to the barbed nipple on the coupler.

05/21/2013

The items in the kit are very high quality and seem they will last! The only problem I had was the tube that connects from the spout to the keg had the regular tap connector and not a low profile tap connector!!!!! So I had to go out and buy the part to make it work!!!!

10/04/2012

Converted my old 4.3 cubic foot Sanyo mini fridge into a sleek aforadble kegerator. It took me under two hours from start to finish, almost all or that was modifying the fridge to allow for the most useable interior space. The kit almost puts itself together, it's that easy! I got the 5lb co2 tank, more than i probably need but its only a few bucks more than the 2.5lb, so unless you're really trying to save space thats a deal. everything works great, and the instructions are aesy to read and understand. I have read a few reviews saying that its dificuly to tap the keg without twisting your lines useing the low profile coupler, it's not rocket science! I am fully satisfied with new Kegerator and you will be too!